[PATCH v2 6/7] Documentation: Rename gpio controller name from cygnus to iproc

[Pramod Kumar]

Hi Rob,

> -----Original Message-----
> From: Rob Herring [mailto:robh at kernel.org]
> Sent: 20 November 2015 21:05
> To: Pramod Kumar
> Cc: Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Ray Jui; Scott Branden;
> Russell King; Linus Walleij; linux-gpio at vger.kernel.org; bcm-kernel-feedback-
> list; Jason Uy; Masahiro Yamada; Thomas Gleixner; Laurent Pinchart;
> devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> kernel at vger.kernel.org; Jonas Gorski
> Subject: Re: [PATCH v2 6/7] Documentation: Rename gpio controller name from
> cygnus to iproc
> 
> On Thu, Nov 19, 2015 at 09:22:18AM +0530, Pramod Kumar wrote:
> > Renamed gpio controller's driver name from cygnus to iproc to make it
> > more generic so that all iProc based SoCs having the same gpio
> > controller could use this.
> >
> > Signed-off-by: Pramod Kumar <pramodku at broadcom.com>
> > Reviewed-by: Ray Jui <rjui at broadcom.com>
> > Reviewed-by: Scott Branden <sbranden at broadcom.com>
> 
> Where's my ack?

Somehow it got missed. I'm sincerely apologetic for it. Will add it.  

Regards,
Pramod
> 
> > ---
> >  .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt}    | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)  rename
> > Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt =>
> > brcm,iproc-gpio.txt} (97%)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > similarity index 97%
> > rename from
> > Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > rename to
> > Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > index 8b1e5d1..e427792 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > @@ -1,4 +1,4 @@
> > -Broadcom Cygnus GPIO/PINCONF Controller
> > +Broadcom iProc GPIO/PINCONF Controller
> >
> >  Required properties:
> >
> > @@ -7,7 +7,7 @@ Required properties:
> >      "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
> >
> >  - reg:
> > -    Define the base and range of the I/O address space that contains the
> Cygnus
> > +    Define the base and range of the I/O address space that contains
> > + SoC
> >  GPIO/PINCONF controller registers
> >
> >  - ngpios:
> > --
> > 1.9.1
> >