[PATCH v3 0/4] Add i.mx7d adc driver support

[Haibo Chen]

This patch add imx7d adc driver support.

Changes in v3:
-move down the irq request in probe()
-remove the property 'num-channels' in dts
-remove some unused head file
-add clear register operation in imx7d_adc_isr()

Changes in V2:
-prefix defines with IMX7D_ for all the register
-use BIT macro to define a single bit
-remove the dma_en from struct adc_feature which is not support currently
-use static const array to replace the switch case code


*** BLURB HERE ***

Haibo Chen (4):
  iio: adc: add IMX7D ADC driver support
  Documentation: add the binding file for Freescale imx7d ADC driver
  ARM: dts: imx7d.dtsi: add ADC support
  ARM: dts: imx7d-sdb: add ADC support

 .../devicetree/bindings/iio/adc/imx7d-adc.txt      |  25 +
 arch/arm/boot/dts/imx7d-sdb.dts                    |  10 +
 arch/arm/boot/dts/imx7d.dtsi                       |  18 +
 drivers/iio/adc/Kconfig                            |   9 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/imx7d_adc.c                        | 570 +++++++++++++++++++++
 6 files changed, 633 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
 create mode 100644 drivers/iio/adc/imx7d_adc.c

-- 
1.9.1