[PATCH 4/4] Documentation: usb: dwc3: qcom: Add TCSR mux usage

[Felipe Balbi]

Hi,

Andy Gross <agross at codeaurora.org> writes:
> This patch adds documentation for the optional syscon-tcsr property in the
> Qualcomm DWC3 node.  The syscon-tcsr specifies the register and bit used to
> configure the TCSR USB phy mux register.
>
> Signed-off-by: Andy Gross <agross at codeaurora.org>
> ---
>  Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> index ca164e7..dfa222d 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
> @@ -8,6 +8,10 @@ Required properties:
>    "core"		Master/Core clock, have to be >= 125 MHz for SS
>  				operation and >= 60MHz for HS operation
>  
> +Optional properties:
> +- syscon-tcsr	Specifies TCSR handle, register offset, and bit position for
> +			configuring the phy mux setting.

oh, it's a PHY mux ? I don't think it should be part of any dwc3-* glue
layer then. By the time we reach dwc3, the mux should be properly
configured.

Kishon, any ideas ?

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151120/b8e081a7/attachment.sig>