[PATCH 1/6] ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC

Geert Uytterhoeven geert+renesas at glider.be
Fri Nov 20 04:36:52 PST 2015


Replace the "arm,cortex-a9-gic" compatible value for the GIC by
"arm,pl390", as the documentation states it is a PL390.
This has been confirmed (thanks Chris, Wolfram!) by reading the
GICD_IIDR register, which reports 0x0000043b (PL390 = 0x00, ARM =
0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
You can read the GICD_IIDR register from U-Boot using

    md 0xe8201008 1
---
 arch/arm/boot/dts/r7s72100.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 5f22d6dcdd141f9c..0c3b9e341ce7fd8e 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -329,7 +329,7 @@
 	};
 
 	gic: interrupt-controller at e8201000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-- 
1.9.1




More information about the linux-arm-kernel mailing list