[PATCH 4/6] ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC

Geert Uytterhoeven geert+renesas at glider.be
Fri Nov 20 04:36:55 PST 2015


Replace the "arm,cortex-a9-gic" compatible value for the GIC by
"arm,pl390", as the documentation states it is a PL390.
This has been confirmed by reading the GICD_IIDR register, which reports
0x0000043b (PL390 = 0x00, ARM = 0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
You can read the GICD_IIDR register from U-Boot using

    md 0xfe438008 1
---
 arch/arm/boot/dts/r8a7778.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index da76f5d95875ce11..fd10197c7dba6d7d 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -61,7 +61,7 @@
 	};
 
 	gic: interrupt-controller at fe438000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xfe438000 0x1000>,
-- 
1.9.1




More information about the linux-arm-kernel mailing list