[PATCH 3/7] touchscreen: icn8318: Use parse_properties and apply_prop_to_x_y helpers
Hans de Goede
hdegoede at redhat.com
Fri Nov 20 03:17:09 PST 2015
Use the touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functions, instead of DIY code, this results in a nice cleanup.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
drivers/input/touchscreen/chipone_icn8318.c | 56 +++++++----------------------
1 file changed, 12 insertions(+), 44 deletions(-)
diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
index 22a6fea..d0ffeba 100644
--- a/drivers/input/touchscreen/chipone_icn8318.c
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -52,11 +53,7 @@ struct icn8318_data {
struct i2c_client *client;
struct input_dev *input;
struct gpio_desc *wake_gpio;
- u32 max_x;
- u32 max_y;
- bool invert_x;
- bool invert_y;
- bool swap_x_y;
+ struct touchscreen_properties prop;
};
static int icn8318_read_touch_data(struct i2c_client *client,
@@ -91,7 +88,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
struct icn8318_data *data = dev_id;
struct device *dev = &data->client->dev;
struct icn8318_touch_data touch_data;
- int i, ret, x, y;
+ int i, ret;
+ s16 x, y;
ret = icn8318_read_touch_data(data->client, &touch_data);
if (ret < 0) {
@@ -127,19 +125,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
x = be16_to_cpu(touch->x);
y = be16_to_cpu(touch->y);
- if (data->invert_x)
- x = data->max_x - x;
-
- if (data->invert_y)
- y = data->max_y - y;
-
- if (!data->swap_x_y) {
- input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
- input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
- } else {
- input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
- input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
- }
+ touchscreen_apply_prop_to_x_y(&data->prop, &x, &y);
+ input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+ input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
}
input_mt_sync_frame(data->input);
@@ -200,10 +188,8 @@ static int icn8318_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
- struct device_node *np = dev->of_node;
struct icn8318_data *data;
struct input_dev *input;
- u32 fuzz_x = 0, fuzz_y = 0;
int error;
if (!client->irq) {
@@ -223,19 +209,6 @@ static int icn8318_probe(struct i2c_client *client,
return error;
}
- if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
- of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
- dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
- return -EINVAL;
- }
-
- /* Optional */
- of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
- of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
- data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
- data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
- data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
-
input = devm_input_allocate_device(dev);
if (!input)
return -ENOMEM;
@@ -246,16 +219,11 @@ static int icn8318_probe(struct i2c_client *client,
input->close = icn8318_stop;
input->dev.parent = dev;
- if (!data->swap_x_y) {
- input_set_abs_params(input, ABS_MT_POSITION_X, 0,
- data->max_x, fuzz_x, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
- data->max_y, fuzz_y, 0);
- } else {
- input_set_abs_params(input, ABS_MT_POSITION_X, 0,
- data->max_y, fuzz_y, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
- data->max_x, fuzz_x, 0);
+ touchscreen_parse_properties(input, true, &data->prop);
+ if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
+ !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
+ dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+ return -EINVAL;
}
error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
--
2.5.0
More information about the linux-arm-kernel
mailing list