[PATCH v2 0/6] Add Marvell berlin4ct clk support
Jisheng Zhang
jszhang at marvell.com
Fri Nov 20 00:42:26 PST 2015
Add berlin4ct clk driver. The berlin4ct SoC contains:
two kinds of PLL: normal PLL and AVPLL. The normal PLL support is done.
The AVPLL support is in TODO list.
two kinds of clk: normal clk and gate clk. The normal clk supports changing
divider, selecting clock source, disabling/enabling etc. The gate clk only
supports disabling/enabling. Both are supported in this series.
Since v1:
- rebased on v4.4-rc1
- refactor out common code from clk-berlin4ct.c
- s/lock/berlin4ct_gateclk_lock
- drop WARN_ON for an allocation failure
- s/kzalloc/kcalloc
- add necessary handling in error code path, such as free memory, iounmap etc.
- initialize init.flags
- drop vcodiv_berlin[] array
Jisheng Zhang (6):
clk: berlin: add common pll driver
clk: berlin: add common clk driver for newer SoCs
clk: berlin: add common gateclk driver for newer SoCs
clk: berlin: add clk support for berlin4ct
dt-bindings: add binding for marvell berlin4ct SoC
arm64: dts: berlin4ct: add pll and clock nodes
.../bindings/clock/marvell,berlin4ct.txt | 38 ++++
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 38 ++++
drivers/clk/berlin/Makefile | 1 +
drivers/clk/berlin/clk-berlin4ct.c | 97 ++++++++++
drivers/clk/berlin/clk.c | 203 +++++++++++++++++++++
drivers/clk/berlin/clk.h | 45 +++++
drivers/clk/berlin/gate.c | 73 ++++++++
drivers/clk/berlin/pll.c | 133 ++++++++++++++
include/dt-bindings/clock/berlin4ct.h | 56 ++++++
9 files changed, 684 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,berlin4ct.txt
create mode 100644 drivers/clk/berlin/clk-berlin4ct.c
create mode 100644 drivers/clk/berlin/clk.c
create mode 100644 drivers/clk/berlin/clk.h
create mode 100644 drivers/clk/berlin/gate.c
create mode 100644 drivers/clk/berlin/pll.c
create mode 100644 include/dt-bindings/clock/berlin4ct.h
--
2.6.2
More information about the linux-arm-kernel
mailing list