[PATCH] extcon: palmas: add support for using VBUSDET output
Chanwoo Choi
cw00.choi at samsung.com
Thu Nov 19 21:33:26 PST 2015
Hi Felipe,
Looks good to me. But I have one comment.
On 2015년 11월 13일 02:57, Felipe Balbi wrote:
> TPS659038 can remux its GPIO_1 as VBUSDET output,
> which can be tied to a SoC GPIO and used as a VBUS
> interrupt.
>
> Beagle X15 uses that, in fact, and without it, I
> could not get USB peripheral working with that
> board.
>
> Signed-off-by: Felipe Balbi <balbi at ti.com>
> ---
> drivers/extcon/extcon-palmas.c | 22 ++++++++++++++++++++--
> 1 file changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> index 93c30a885740..7985d092c069 100644
> --- a/drivers/extcon/extcon-palmas.c
> +++ b/drivers/extcon/extcon-palmas.c
> @@ -296,10 +296,28 @@ static int palmas_usb_probe(struct platform_device *pdev)
> }
>
> if (palmas_usb->enable_vbus_detection) {
> + int irq = platform_get_irq(pdev, 0);
> +
> + if (irq > 0) {
> + /* remux GPIO_1 as VBUSDET */
> + status = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE,
> + PALMAS_PRIMARY_SECONDARY_PAD1,
> + PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK,
> + (1 << 3));
PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT is appropriate instead of using '3'.
Also, I don't recommend the over line 80. The everything else is good
> + if (status < 0) {
> + dev_err(&pdev->dev, "can't remux GPIO1\n");
> + return status;
> + }
> +
> + palmas_usb->vbus_irq = irq;
> + } else {
> + irq = regmap_irq_get_virq(palmas->irq_data,
> + PALMAS_VBUS_IRQ);
> + palmas_usb->vbus_irq = irq;
> + }
> +
> palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data,
> PALMAS_VBUS_OTG_IRQ);
> - palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data,
> - PALMAS_VBUS_IRQ);
> status = devm_request_threaded_irq(palmas_usb->dev,
> palmas_usb->vbus_irq, NULL,
> palmas_vbus_irq_handler,
>
Thanks,
Chanwoo Choi
More information about the linux-arm-kernel
mailing list