[PATCH 1/6] arm64: renesas: r8a7795: Add Renesas R8A7795 SoC support

[Simon Horman]

Initial version of Renesas R-Car H3 support (V10)

Signed-off-by: Gaku Inami <gaku.inami.xw at bp.renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Magnus Damm <damm+renesas at opensource.se>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 Documentation/devicetree/bindings/arm/shmobile.txt |  2 +
 arch/arm64/Kconfig.platforms                       | 17 +++++
 arch/arm64/boot/dts/Makefile                       |  1 +
 arch/arm64/boot/dts/renesas/Makefile               |  2 +
 arch/arm64/boot/dts/renesas/r8a7795.dtsi           | 83 ++++++++++++++++++++++
 5 files changed, 105 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/Makefile
 create mode 100644 arch/arm64/boot/dts/renesas/r8a7795.dtsi

diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 40bb9007cd0d..6712ebbe5f49 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -27,6 +27,8 @@ SoCs:
     compatible = "renesas,r8a7793"
   - R-Car E2 (R8A77940)
     compatible = "renesas,r8a7794"
+  - R-Car H3 (R8A77950)
+    compatible = "renesas,r8a7795"
 
 
 Boards:
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 4043c35962cc..8446f27b18df 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -67,6 +67,23 @@ config ARCH_SEATTLE
 	help
 	  This enables support for AMD Seattle SOC Family
 
+config ARCH_SHMOBILE
+	bool
+
+config ARCH_RENESAS
+	bool "Renesas SoC Platforms"
+	select ARCH_SHMOBILE
+	select PINCTRL
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the ARMv8 based Renesas SoCs.
+
+config ARCH_R8A7795
+	bool "Renesas R-Car H3 SoC Platform"
+	depends on ARCH_RENESAS
+	help
+	  This enables support for the Renesas R-Car H3 SoC.
+
 config ARCH_STRATIX10
 	bool "Altera's Stratix 10 SoCFPGA Family"
 	help
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index eb3c42d97175..0e775e4d6a00 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -10,6 +10,7 @@ dts-dirs += hisilicon
 dts-dirs += marvell
 dts-dirs += mediatek
 dts-dirs += qcom
+dts-dirs += renesas
 dts-dirs += rockchip
 dts-dirs += sprd
 dts-dirs += xilinx
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
new file mode 100644
index 000000000000..fec69f46d65b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -0,0 +1,2 @@
+always		:= $(dtb-y)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
new file mode 100644
index 000000000000..8d7552020daf
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Device Tree Source for the r8a7795 SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r8a7795";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1 core only at this point */
+		a57_0: cpu at 0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			device_type = "cpu";
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller at 0xf1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		cpg: clock-controller at e6150000 {
+			compatible = "renesas,r8a7795-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+	};
+};
-- 
2.1.4