[GIT PULL] Renesas ARM Based SoC DT Updates for v4.5
Simon Horman
horms+renesas at verge.net.au
Thu Nov 19 17:05:25 PST 2015
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v4.5.
The following changes since commit 99f7445ea41c0187cd2e78bcb58cdd9e6c1756e5:
ARM: shmobile: porter: enable internal PCI and USB PHY (2015-10-13 10:00:12 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.5
for you to fetch changes up to d537543b3948bc3bc9dede248fa455493e055457:
ARM: shmobile: alt: add VIN0, ADV7180 DT support (2015-11-18 09:10:38 -0800)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.5
* henninger: Remove as it is now replaced by silk
* koelsch: Move SPI partitions to subnode
* porter: Add CAN0 and HS-USB support
* r8a7793/gose: Add QSPI, PFC support
* r8a7793: Add GPIO, DMAC, theral, IPMMU support
* r8a7794/alt: Add DU support
* r8a7794: Disable all IPMMU nodes by default
* r8a779[0134]: Use Use SoC specific binding for rcar-dmac
* r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with
wakeup-source property
* r8a779[14]: Correct "gpio-ranges" properties
* r8a779[14]: Remove bogus imp_clk node
* silk: Add SDHI1 support
----------------------------------------------------------------
Geert Uytterhoeven (3):
ARM: shmobile: r8a7794 dtsi: Remove bogus imp_clk node
ARM: shmobile: r8a7791 dtsi: Remove bogus imp_clk node
ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode
Laurent Pinchart (2):
ARM: shmobile: r8a7794: Add DU0 clock
ARM: shmobile: r8a7794: Add DU node to device tree
Magnus Damm (4):
ARM: shmobile: r8a7794: Disable all IPMMU nodes by default
ARM: shmobile: r8a7793: Add IPMMU nodes
ARM: shmobile: r8a7794: alt: Enable VGA port
ARM: shmobile: r8a7793: Add GPIO nodes to device tree
Sergei Shtylyov (6):
ARM: shmobile: porter: add HS-USB DT support
ARM: shmobile: silk: add SDHI1 DT support
ARM: shmobile: r8a7790: fix "gpio-ranges" props
ARM: shmobile: r8a7791: fix "gpio-ranges" props
ARM: shmobile: porter: add CAN0 DT support
ARM: shmobile: henninger: remove board DT
Simon Horman (11):
ARM: shmobile: r8a7793: Add thermal device to DT
ARM: shmobile: r8a7793: Add PFC to DT
ARM: shmobile: gose: Configure PFC in DT
ARM: shmobile: r8a7793: Add DMAC devices to DT
ARM: shmobile: r8a7793: Add QSPI device to DT
ARM: shmobile: gose: Add QSPI device to DT
ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: alt: Add pfc pins to DT
Sudeep Holla (1):
ARM: dts: shmobile/r8a7xxx: replace gpio-key, wakeup with wakeup-source property
Ulrich Hecht (2):
ARM: shmobile: alt: add I2C1 DT support
ARM: shmobile: alt: add VIN0, ADV7180 DT support
arch/arm/boot/dts/Makefile | 1 -
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +-
arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 +-
arch/arm/boot/dts/r8a7790-lager.dts | 8 +-
arch/arm/boot/dts/r8a7790.dtsi | 12 +-
arch/arm/boot/dts/r8a7791-henninger.dts | 320 --------------------------
arch/arm/boot/dts/r8a7791-koelsch.dts | 55 ++---
arch/arm/boot/dts/r8a7791-porter.dts | 20 ++
arch/arm/boot/dts/r8a7791.dtsi | 18 +-
arch/arm/boot/dts/r8a7793-gose.dts | 74 ++++++
arch/arm/boot/dts/r8a7793.dtsi | 294 +++++++++++++++++++++++
arch/arm/boot/dts/r8a7794-alt.dts | 125 ++++++++++
arch/arm/boot/dts/r8a7794-silk.dts | 40 ++++
arch/arm/boot/dts/r8a7794.dtsi | 49 ++--
arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +-
include/dt-bindings/clock/r8a7794-clock.h | 1 +
16 files changed, 637 insertions(+), 386 deletions(-)
delete mode 100644 arch/arm/boot/dts/r8a7791-henninger.dts
More information about the linux-arm-kernel
mailing list