[PATCH v4] mmc: sdhci at91: add PM support
Ulf Hansson
ulf.hansson at linaro.org
Thu Nov 19 03:29:47 PST 2015
On 11 November 2015 at 19:11, Ludovic Desroches
<ludovic.desroches at atmel.com> wrote:
> Add runtime PM support and use runtime_force_suspend|resume() for system
> PM.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
Thanks, applied for next!
Kind regards
Uffe
> ---
>
> Changes:
> - from v3: add error handling of runtime PM
> - from v2: cleanup thanks to Ulf feedback
> - from v1: take a runtime PM centric approach
>
> drivers/mmc/host/sdhci-of-at91.c | 72 ++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 70 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 06d0b50..81ab9db 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -21,6 +21,8 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
>
> #include "sdhci-pltfm.h"
>
> @@ -51,6 +53,60 @@ static const struct of_device_id sdhci_at91_dt_match[] = {
> {}
> };
>
> +#ifdef CONFIG_PM
> +static int sdhci_at91_runtime_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_at91_priv *priv = pltfm_host->priv;
> + int ret;
> +
> + ret = sdhci_runtime_suspend_host(host);
> +
> + clk_disable_unprepare(priv->gck);
> + clk_disable_unprepare(priv->hclock);
> + clk_disable_unprepare(priv->mainck);
> +
> + return ret;
> +}
> +
> +static int sdhci_at91_runtime_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_at91_priv *priv = pltfm_host->priv;
> + int ret;
> +
> + ret = clk_prepare_enable(priv->mainck);
> + if (ret) {
> + dev_err(dev, "can't enable mainck\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->hclock);
> + if (ret) {
> + dev_err(dev, "can't enable hclock\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->gck);
> + if (ret) {
> + dev_err(dev, "can't enable gck\n");
> + return ret;
> + }
> +
> + return sdhci_runtime_resume_host(host);
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
> + sdhci_at91_runtime_resume,
> + NULL)
> +};
> +
> static int sdhci_at91_probe(struct platform_device *pdev)
> {
> const struct of_device_id *match;
> @@ -144,12 +200,20 @@ static int sdhci_at91_probe(struct platform_device *pdev)
>
> sdhci_get_of_property(pdev);
>
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> + pm_runtime_use_autosuspend(&pdev->dev);
> +
> ret = sdhci_add_host(host);
> if (ret)
> - goto clocks_disable_unprepare;
> + goto pm_runtime_disable;
>
> return 0;
>
> +pm_runtime_disable:
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> clocks_disable_unprepare:
> clk_disable_unprepare(priv->gck);
> clk_disable_unprepare(priv->mainck);
> @@ -165,6 +229,10 @@ static int sdhci_at91_remove(struct platform_device *pdev)
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_at91_priv *priv = pltfm_host->priv;
>
> + pm_runtime_get_sync(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> +
> sdhci_pltfm_unregister(pdev);
>
> clk_disable_unprepare(priv->gck);
> @@ -178,7 +246,7 @@ static struct platform_driver sdhci_at91_driver = {
> .driver = {
> .name = "sdhci-at91",
> .of_match_table = sdhci_at91_dt_match,
> - .pm = SDHCI_PLTFM_PMOPS,
> + .pm = &sdhci_at91_dev_pm_ops,
> },
> .probe = sdhci_at91_probe,
> .remove = sdhci_at91_remove,
> --
> 2.5.0
>
More information about the linux-arm-kernel
mailing list