[PATCH 2/2] arm-cci: CoreLink CCI-550 PMU driver
Suzuki K. Poulose
suzuki.poulose at arm.com
Tue Nov 17 10:30:40 PST 2015
Add ARM CoreLink CCI-550 cache coherent interconnect PMU
driver support. The CCI-550 PMU shares all the attributes of CCI-500
PMU, except for an additional master interface (MI-6 - 0xe).
CCI-550 requires the same work around as for CCI-500 to
write to the PMU counter.
Cc: Punit Agrawal <punit.agrawal at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose at arm.com>
---
Documentation/devicetree/bindings/arm/cci.txt | 2 +
drivers/bus/Kconfig | 8 +--
drivers/bus/arm-cci.c | 85 ++++++++++++++++++++++++-
3 files changed, 90 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index aef1d20..a1a5a7e 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -34,6 +34,7 @@ specific to ARM.
Definition: must contain one of the following:
"arm,cci-400"
"arm,cci-500"
+ "arm,cci-550"
- reg
Usage: required
@@ -101,6 +102,7 @@ specific to ARM.
"arm,cci-400-pmu" - DEPRECATED, permitted only where OS has
secure acces to CCI registers
"arm,cci-500-pmu,r0"
+ "arm,cci-550-pmu,r0"
- reg:
Usage: required
Value type: Integer cells. A register entry, expressed
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 3793f4e..54c030b 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -35,14 +35,14 @@ config ARM_CCI400_PORT_CTRL
interconnect for ARM platforms.
config ARM_CCI5xx_PMU
- bool "ARM CCI500 PMU support"
+ bool "ARM CCI-500/CCI-550 PMU support"
depends on (ARM && CPU_V7) || ARM64
depends on PERF_EVENTS
select ARM_CCI_PMU
help
- Support for PMU events monitoring on the ARM CCI-500 cache coherent
- interconnect. CCI-500 provides 8 independent event counters, which
- can count events pertaining to the slave/master interfaces as well
+ Support for PMU events monitoring on the ARM CCI-500/CCI-550 cache
+ coherent interconnects. Both of them provide 8 independent event counters,
+ which can count events pertaining to the slave/master interfaces as well
as the internal events to the CCI.
If unsure, say Y
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 95e210e..991ac7e 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -54,6 +54,7 @@ static const struct of_device_id arm_cci_matches[] = {
#endif
#ifdef CONFIG_ARM_CCI5xx_PMU
{ .compatible = "arm,cci-500", },
+ { .compatible = "arm,cci-550", },
#endif
{},
};
@@ -156,6 +157,7 @@ enum cci_models {
#endif
#ifdef CONFIG_ARM_CCI5xx_PMU
CCI500_R0,
+ CCI550_R0,
#endif
CCI_MODEL_MAX
};
@@ -449,6 +451,7 @@ static inline struct cci_pmu_model *probe_cci_model(struct platform_device *pdev
#define CCI5xx_PORT_M3 0xb
#define CCI5xx_PORT_M4 0xc
#define CCI5xx_PORT_M5 0xd
+#define CCI5xx_PORT_M6 0xe
#define CCI5xx_PORT_GLOBAL 0xf
@@ -609,6 +612,58 @@ static int cci500_validate_hw_event(struct cci_pmu *cci_pmu,
return -ENOENT;
}
+/*
+ * CCI550 provides 8 independent event counters that can count
+ * any of the events available.
+ * CCI550 PMU event source ids
+ * 0x0-0x6 - Slave interfaces
+ * 0x8-0xe - Master interfaces
+ * 0xf - Global Events
+ * 0x7 - Reserved
+ */
+static int cci550_validate_hw_event(struct cci_pmu *cci_pmu,
+ unsigned long hw_event)
+{
+ u32 ev_source = CCI5xx_PMU_EVENT_SOURCE(hw_event);
+ u32 ev_code = CCI5xx_PMU_EVENT_CODE(hw_event);
+ int if_type;
+
+ if (hw_event & ~CCI5xx_PMU_EVENT_MASK)
+ return -ENOENT;
+
+ switch (ev_source) {
+ case CCI5xx_PORT_S0:
+ case CCI5xx_PORT_S1:
+ case CCI5xx_PORT_S2:
+ case CCI5xx_PORT_S3:
+ case CCI5xx_PORT_S4:
+ case CCI5xx_PORT_S5:
+ case CCI5xx_PORT_S6:
+ if_type = CCI_IF_SLAVE;
+ break;
+ case CCI5xx_PORT_M0:
+ case CCI5xx_PORT_M1:
+ case CCI5xx_PORT_M2:
+ case CCI5xx_PORT_M3:
+ case CCI5xx_PORT_M4:
+ case CCI5xx_PORT_M5:
+ case CCI5xx_PORT_M6:
+ if_type = CCI_IF_MASTER;
+ break;
+ case CCI5xx_PORT_GLOBAL:
+ if_type = CCI_IF_GLOBAL;
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ if (ev_code >= cci_pmu->model->event_ranges[if_type].min &&
+ ev_code <= cci_pmu->model->event_ranges[if_type].max)
+ return hw_event;
+
+ return -ENOENT;
+}
+
#endif /* CONFIG_ARM_CCI5xx_PMU */
static ssize_t cci_pmu_format_show(struct device *dev,
@@ -842,7 +897,7 @@ static void __pmu_write_counter(struct cci_pmu *cci_pmu, u32 value, int idx)
#ifdef CONFIG_ARM_CCI5xx_PMU
/*
- * CCI-500 has advanced power saving policies, which could gate the
+ * CCI-500/CCI-550 has advanced power saving policies, which could gate the
* clocks to the PMU counters, which makes the writes to them ineffective.
* The only way to write to those counters is when the global counters
* are enabled and the particular counter is enabled.
@@ -1474,6 +1529,30 @@ static struct cci_pmu_model cci_pmu_models[] = {
.validate_hw_event = cci500_validate_hw_event,
.write_counter = cci5xx_pmu_write_counter,
},
+ [CCI550_R0] = {
+ .name = "CCI_550",
+ .fixed_hw_cntrs = 0,
+ .num_hw_cntrs = 8,
+ .cntr_size = SZ_64K,
+ .format_attrs = cci5xx_pmu_format_attrs,
+ .event_attrs = cci5xx_pmu_event_attrs,
+ .event_ranges = {
+ [CCI_IF_SLAVE] = {
+ CCI5xx_SLAVE_PORT_MIN_EV,
+ CCI5xx_SLAVE_PORT_MAX_EV,
+ },
+ [CCI_IF_MASTER] = {
+ CCI5xx_MASTER_PORT_MIN_EV,
+ CCI5xx_MASTER_PORT_MAX_EV,
+ },
+ [CCI_IF_GLOBAL] = {
+ CCI5xx_GLOBAL_PORT_MIN_EV,
+ CCI5xx_GLOBAL_PORT_MAX_EV,
+ },
+ },
+ .validate_hw_event = cci550_validate_hw_event,
+ .write_counter = cci5xx_pmu_write_counter,
+ },
#endif
};
@@ -1497,6 +1576,10 @@ static const struct of_device_id arm_cci_pmu_matches[] = {
.compatible = "arm,cci-500-pmu,r0",
.data = &cci_pmu_models[CCI500_R0],
},
+ {
+ .compatible = "arm,cci-550-pmu,r0",
+ .data = &cci_pmu_models[CCI550_R0],
+ },
#endif
{},
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list