[PATCH] input: st1232.c: Add devicetree attributes

[Dmitry Torokhov]

Hi Sander,

On Sun, Nov 15, 2015 at 05:20:47PM +0100, Sander Vermin wrote:
> -static int __maybe_unused st1232_ts_suspend(struct device *dev)
> +#ifdef CONFIG_PM_SLEEP

Why?

> +static int st1232_ts_suspend(struct device *dev)
>  {
>  	struct i2c_client *client = to_i2c_client(dev);
> -	struct st1232_ts_data *ts = i2c_get_clientdata(client);
> +	struct st1232_data *data = i2c_get_clientdata(client);
>  
> -	if (device_may_wakeup(&client->dev)) {
> -		enable_irq_wake(client->irq);
> -	} else {
> -		disable_irq(client->irq);
> -		st1232_ts_power(ts, false);
> -	}
> +	mutex_lock(&data->input_dev->mutex);
> +	if (data->input_dev->users)
> +		st1232_stop(data->input_dev);
> +	mutex_unlock(&data->input_dev->mutex);
>  
>  	return 0;
>  }
>  
> -static int __maybe_unused st1232_ts_resume(struct device *dev)
> +static int st1232_ts_resume(struct device *dev)
>  {
>  	struct i2c_client *client = to_i2c_client(dev);
> -	struct st1232_ts_data *ts = i2c_get_clientdata(client);
> +	struct st1232_data *data = i2c_get_clientdata(client);
>  
> -	if (device_may_wakeup(&client->dev)) {
> -		disable_irq_wake(client->irq);
> -	} else {
> -		st1232_ts_power(ts, true);
> -		enable_irq(client->irq);
> -	}
> +	mutex_lock(&data->input_dev->mutex);
> +	if (data->input_dev->users)
> +		st1232_start(data->input_dev);
> +	mutex_unlock(&data->input_dev->mutex);
>  
>  	return 0;
>  }
> +#endif
>  
>  static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
>  			 st1232_ts_suspend, st1232_ts_resume);
> @@ -282,13 +436,12 @@ static const struct i2c_device_id st1232_ts_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
>  
> -#ifdef CONFIG_OF

Why?

> -static const struct of_device_id st1232_ts_dt_ids[] = {
> +static const struct of_device_id st1232_of_match[] = {
>  	{ .compatible = "sitronix,st1232", },
>  	{ }
>  };
> -MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
> -#endif
> +MODULE_DEVICE_TABLE(of, st1232_of_match);
> +
>  
>  static struct i2c_driver st1232_ts_driver = {
>  	.probe		= st1232_ts_probe,
> @@ -296,13 +449,14 @@ static struct i2c_driver st1232_ts_driver = {
>  	.id_table	= st1232_ts_id,
>  	.driver = {
>  		.name	= ST1232_TS_NAME,
> -		.of_match_table = of_match_ptr(st1232_ts_dt_ids),
> +		.owner	= THIS_MODULE,
> +		.of_match_table = st1232_of_match,

Why?

There seems many intermingled changes that are done to the driver, you
need to split them apart and explain why they are needed.

Thanks!

-- 
Dmitry