[RESEND RFC/PATCH 4/8] dt-bindings: Add a binding for Mediatek Video Encoder

Tiffany Lin tiffany.lin at mediatek.com
Tue Nov 17 04:54:41 PST 2015


add a DT binding documentation of Video Encoder for the
MT8173 SoC from Mediatek.

Signed-off-by: Tiffany Lin <tiffany.lin at mediatek.com>
---
 .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt

diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
new file mode 100644
index 0000000..fea4d7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -0,0 +1,58 @@
+Mediatek Video Codec
+
+Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
+supports high resolution encoding functionalities.
+
+Required properties:
+- compatible : "mediatek,mt8173-vcodec-enc" for encoder
+- reg : Physical base address of the video codec registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the cpu.
+- larb : must contain the larbes of current platform
+- clocks : list of clock specifiers, corresponding to entries in
+  the clock-names property;
+- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
+- iommus : list of iommus specifiers should be enabled for hw encode.
+  There are 2 cells needed to enable/disable iommu.
+  The first one is local arbiter index(larbid), and the other is port
+  index(portid) within local arbiter. Specifies the larbid and portid
+  as defined in dt-binding/memory/mt8173-larb-port.h.
+- vpu : the node of video processor unit
+
+Example:
+vcodec_enc: vcodec at 0x18002000 {
+    compatible = "mediatek,mt8173-vcodec-enc";
+    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
+          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
+    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
+           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+    larb = <&larb3>,
+           <&larb5>;
+    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
+    vpu = <&vpu>;
+    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    clock-names = "vencpll",
+                  "venc_lt_sel",
+                  "vcodecpll_370p5_ck";
+  };
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list