[PATCH 1/2] arm64: KVM: Fix AArch32 to AArch64 register mapping

Robin Murphy robin.murphy at arm.com
Tue Nov 17 03:27:51 PST 2015


Hi Marc,

On 16/11/15 10:28, Marc Zyngier wrote:
> When running a 32bit guest under a 64bit hypervisor, the ARMv8
> architecture defines a mapping of the 32bit registers in the 64bit
> space. This includes banked registers that are being demultiplexed
> over the 64bit ones.
>
> On exception caused by an operation involving a 32bit register, the
> HW exposes the register number in the ESR_EL2 register. It was so
> far understood that SW had to compute which register was AArch64
> register was used (based on the current AArch32 mode and register
> number).
>
> It turns out that I misinterpreted the ARM ARM, and the clue is in
> D1.20.1: "For some exceptions, the exception syndrome given in the
> ESR_ELx identifies one or more register numbers from the issued
> instruction that generated the exception. Where the exception is
> taken from an Exception level using AArch32 these register numbers
> give the AArch64 view of the register."
>
> Which means that the HW is already giving us the translated version,
> and that we shouldn't try to interpret it at all (for example, doing
> an MMIO operation from the IRQ mode using the LR register leads to
> very unexpected behaviours).
>
> The fix is thus not to perform a call to vcpu_reg32() at all from
> vcpu_reg(), and use whatever register number is supplied directly.
> The only case we need to find out about the mapping is when we
> actively generate a register access, which only occurs when injecting
> a fault in a guest.
>
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> ---
>   arch/arm64/include/asm/kvm_emulate.h | 8 +++++---
>   arch/arm64/kvm/inject_fault.c        | 2 +-
>   2 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index 17e92f0..3ca894e 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -99,11 +99,13 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
>   	*vcpu_cpsr(vcpu) |= COMPAT_PSR_T_BIT;
>   }
>
> +/*
> + * vcpu_reg should always be passed a register number coming from a
> + * read of ESR_EL2. Otherwise, it may give the wrong result on AArch32
> + * with banked registers.
> + */
>   static inline unsigned long *vcpu_reg(const struct kvm_vcpu *vcpu, u8 reg_num)
>   {
> -	if (vcpu_mode_is_32bit(vcpu))
> -		return vcpu_reg32(vcpu, reg_num);
> -
>   	return (unsigned long *)&vcpu_gp_regs(vcpu)->regs.regs[reg_num];
>   }
>
> diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
> index 85c5715..648112e 100644
> --- a/arch/arm64/kvm/inject_fault.c
> +++ b/arch/arm64/kvm/inject_fault.c
> @@ -48,7 +48,7 @@ static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
>
>   	/* Note: These now point to the banked copies */
>   	*vcpu_spsr(vcpu) = new_spsr_value;
> -	*vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
> +	*vcpu_reg32(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;

To the best of my knowledge after picking through all the uses of 
vcpu_reg, particularly in the shared 32-bit code, this does seem to be 
the only one which involves a potentially-banked register number that 
didn't originally come from an ESR read, and thus needs translation.

Reviewed-by: Robin Murphy <robin.murphy at arm.com>

(unfortunately I don't have an actual test-case as it was already a 
third-hand report when I started trying to look into it).

Thanks for picking this up,
Robin.

>
>   	/* Branch to exception vector */
>   	if (sctlr & (1 << 13))
>




More information about the linux-arm-kernel mailing list