[PATCH 10/12] tty: amba-pl011: add support for 32-bit register access

[Timur Tabi]

Russell King wrote:
> Add support for 32-bit register accesses to the AMBA PL011 UART.  This
> is needed for ZTE UARTs, which require 32-bit accesses as opposed to
> the more normal 16-bit accesses.
>
> Signed-off-by: Russell King<rmk+kernel at arm.linux.org.uk>
> ---
>   drivers/tty/serial/amba-pl011.c | 15 +++++++++++++--
>   1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index afa0de7d481f..3470a1e67bbc 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -93,6 +93,7 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
>   struct vendor_data {
>   	const u16		*reg_offset;
>   	unsigned int		ifls;
> +	bool			access_32b;

So no love for my suggestion to use port->iotype instead of this new field?

static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
     unsigned int reg)
{
     void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);

     if (uap->port.iotype == UPIO_MEM32)
         writel(val, addr);
     else
         writew(val, addr);
}

-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.