[PATCH 05/12] tty: amba-pl011: add register lookup table
Russell King
rmk+kernel at arm.linux.org.uk
Mon Nov 16 09:40:26 PST 2015
Add a register lookup table, which allows the register offsets to be
adjusted on a per-port basis.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/tty/serial/amba-pl011.c | 33 ++++++++++++++++++++++++-
drivers/tty/serial/amba-pl011.h | 53 ++++++++++++++++++++++-------------------
2 files changed, 60 insertions(+), 26 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 5ea5b0a3dbb9..628557f6a7a1 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -73,6 +73,34 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
+static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
+ [REG_DR] = UART01x_DR,
+ [REG_ST_DMAWM] = ST_UART011_DMAWM,
+ [REG_ST_TIMEOUT] = ST_UART011_TIMEOUT,
+ [REG_FR] = UART01x_FR,
+ [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_IBRD] = UART011_IBRD,
+ [REG_FBRD] = UART011_FBRD,
+ [REG_LCRH] = UART011_LCRH,
+ [REG_ST_LCRH_TX] = ST_UART011_LCRH_TX,
+ [REG_CR] = UART011_CR,
+ [REG_IFLS] = UART011_IFLS,
+ [REG_IMSC] = UART011_IMSC,
+ [REG_RIS] = UART011_RIS,
+ [REG_MIS] = UART011_MIS,
+ [REG_ICR] = UART011_ICR,
+ [REG_DMACR] = UART011_DMACR,
+ [REG_ST_XFCR] = ST_UART011_XFCR,
+ [REG_ST_XON1] = ST_UART011_XON1,
+ [REG_ST_XON2] = ST_UART011_XON2,
+ [REG_ST_XOFF1] = ST_UART011_XOFF1,
+ [REG_ST_XOFF2] = ST_UART011_XOFF2,
+ [REG_ST_ITCR] = ST_UART011_ITCR,
+ [REG_ST_ITIP] = ST_UART011_ITIP,
+ [REG_ST_ABCR] = ST_UART011_ABCR,
+ [REG_ST_ABIMSC] = ST_UART011_ABIMSC,
+};
+
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
@@ -164,6 +192,7 @@ struct pl011_dmatx_data {
*/
struct uart_amba_port {
struct uart_port port;
+ const u16 *reg_offset;
struct clk *clk;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
@@ -189,7 +218,7 @@ struct uart_amba_port {
static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
unsigned int reg)
{
- return reg;
+ return uap->reg_offset[reg];
}
static unsigned int pl011_read(const struct uart_amba_port *uap,
@@ -2397,6 +2426,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
if (IS_ERR(uap->clk))
return PTR_ERR(uap->clk);
+ uap->reg_offset = pl011_std_offsets;
uap->vendor = vendor;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
@@ -2478,6 +2508,7 @@ static int sbsa_uart_probe(struct platform_device *pdev)
if (!uap)
return -ENOMEM;
+ uap->reg_offset = pl011_std_offsets;
uap->vendor = &vendor_sbsa;
uap->fifosize = 32;
uap->port.irq = platform_get_irq(pdev, 0);
diff --git a/drivers/tty/serial/amba-pl011.h b/drivers/tty/serial/amba-pl011.h
index b7eb1bc2fab9..0c6756dba2fe 100644
--- a/drivers/tty/serial/amba-pl011.h
+++ b/drivers/tty/serial/amba-pl011.h
@@ -2,31 +2,34 @@
#define AMBA_PL011_H
enum {
- REG_DR = UART01x_DR,
- REG_ST_DMAWM = ST_UART011_DMAWM,
- REG_ST_TIMEOUT = ST_UART011_TIMEOUT,
- REG_FR = UART01x_FR,
- REG_ST_LCRH_RX = ST_UART011_LCRH_RX,
- REG_IBRD = UART011_IBRD,
- REG_FBRD = UART011_FBRD,
- REG_LCRH = UART011_LCRH,
- REG_ST_LCRH_TX = ST_UART011_LCRH_TX,
- REG_CR = UART011_CR,
- REG_IFLS = UART011_IFLS,
- REG_IMSC = UART011_IMSC,
- REG_RIS = UART011_RIS,
- REG_MIS = UART011_MIS,
- REG_ICR = UART011_ICR,
- REG_DMACR = UART011_DMACR,
- REG_ST_XFCR = ST_UART011_XFCR,
- REG_ST_XON1 = ST_UART011_XON1,
- REG_ST_XON2 = ST_UART011_XON2,
- REG_ST_XOFF1 = ST_UART011_XOFF1,
- REG_ST_XOFF2 = ST_UART011_XOFF2,
- REG_ST_ITCR = ST_UART011_ITCR,
- REG_ST_ITIP = ST_UART011_ITIP,
- REG_ST_ABCR = ST_UART011_ABCR,
- REG_ST_ABIMSC = ST_UART011_ABIMSC,
+ REG_DR,
+ REG_ST_DMAWM,
+ REG_ST_TIMEOUT,
+ REG_FR,
+ REG_ST_LCRH_RX,
+ REG_IBRD,
+ REG_FBRD,
+ REG_LCRH,
+ REG_ST_LCRH_TX,
+ REG_CR,
+ REG_IFLS,
+ REG_IMSC,
+ REG_RIS,
+ REG_MIS,
+ REG_ICR,
+ REG_DMACR,
+ REG_ST_XFCR,
+ REG_ST_XON1,
+ REG_ST_XON2,
+ REG_ST_XOFF1,
+ REG_ST_XOFF2,
+ REG_ST_ITCR,
+ REG_ST_ITIP,
+ REG_ST_ABCR,
+ REG_ST_ABIMSC,
+
+ /* The size of the array - must be last */
+ REG_ARRAY_SIZE,
};
#endif
--
2.1.0
More information about the linux-arm-kernel
mailing list