[PATCH v4 09/24] regulator: pwm: use pwm_get/set_default_xxx() helpers where appropriate

[Boris Brezillon]

pwm_set/get_default_xxx() helpers have been introduced to differentiate
the default PWM states (those retrieved through DT, PWM lookup table or
statically assigned by the driver) and the current ones.
Make use of those helpers where appropriate.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Tested-by: Heiko Stuebner <heiko at sntech.de>
---
 drivers/regulator/pwm-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 3aca067b..9ffdbd6 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -56,7 +56,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	int dutycycle;
 	int ret;
 
-	pwm_reg_period = pwm_get_period(drvdata->pwm);
+	pwm_reg_period = pwm_get_default_period(drvdata->pwm);
 
 	dutycycle = (pwm_reg_period *
 		    drvdata->duty_cycle_table[selector].dutycycle) / 100;
@@ -131,7 +131,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 	unsigned int ramp_delay = rdev->constraints->ramp_delay;
-	unsigned int period = pwm_get_period(drvdata->pwm);
+	unsigned int period = pwm_get_default_period(drvdata->pwm);
 	int duty_cycle;
 	int ret;
 
-- 
2.1.4