[PATCH v2 1/9] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings
Rob Herring
robh at kernel.org
Fri Nov 13 06:40:32 PST 2015
On Fri, Nov 13, 2015 at 12:04:06PM +0800, Chen-Yu Tsai wrote:
> The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
> It is functionally identical to AXP221; only the regulator default
> voltage/status and the external host interface are different.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Rob Herring <robh at kernel.org>
> ---
> Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index a474359dd206..fd39fa54571b 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -5,11 +5,12 @@ axp152 (X-Powers)
> axp202 (X-Powers)
> axp209 (X-Powers)
> axp221 (X-Powers)
> +axp223 (X-Powers)
>
> Required properties:
> - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
> - "x-powers,axp221"
> -- reg: The I2C slave address for the AXP chip
> + "x-powers,axp221", "x-powers,axp223"
> +- reg: The I2C slave address or RSB hardware address for the AXP chip
> - interrupt-parent: The parent interrupt controller
> - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
> - interrupt-controller: The PMIC has its own internal IRQs
> @@ -51,7 +52,7 @@ LDO3 : LDO : ldo3in-supply
> LDO4 : LDO : ldo24in-supply : shared supply
> LDO5 : LDO : ldo5in-supply
>
> -AXP221 regulators, type, and corresponding input supply names:
> +AXP221/AXP223 regulators, type, and corresponding input supply names:
>
> Regulator Type Supply Name Notes
> --------- ---- ----------- -----
> --
> 2.6.2
>
More information about the linux-arm-kernel
mailing list