[PATCH] clocksource/drivers/arm_global_timer: Always use {readl|writel}_relaxed
Jisheng Zhang
jszhang at marvell.com
Fri Nov 13 00:40:25 PST 2015
On Fri, 13 Nov 2015 16:34:38 +0800
Jisheng Zhang <jszhang at marvell.com> wrote:
> This driver use both readl/writel and their relaxed version, this patch
> tries to unify the io accesses.
I'm sorry. This is the version I'd like to send for review and merge. Can you
please kindly have a review?
Thanks
>
> Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
> ---
> drivers/clocksource/arm_global_timer.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
> index a2cb6fa..84a5a5d 100644
> --- a/drivers/clocksource/arm_global_timer.c
> +++ b/drivers/clocksource/arm_global_timer.c
> @@ -99,27 +99,27 @@ static void gt_compare_set(unsigned long delta, int periodic)
>
> counter += delta;
> ctrl = GT_CONTROL_TIMER_ENABLE;
> - writel(ctrl, gt_base + GT_CONTROL);
> - writel(lower_32_bits(counter), gt_base + GT_COMP0);
> - writel(upper_32_bits(counter), gt_base + GT_COMP1);
> + writel_relaxed(ctrl, gt_base + GT_CONTROL);
> + writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0);
> + writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1);
>
> if (periodic) {
> - writel(delta, gt_base + GT_AUTO_INC);
> + writel_relaxed(delta, gt_base + GT_AUTO_INC);
> ctrl |= GT_CONTROL_AUTO_INC;
> }
>
> ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;
> - writel(ctrl, gt_base + GT_CONTROL);
> + writel_relaxed(ctrl, gt_base + GT_CONTROL);
> }
>
> static int gt_clockevent_shutdown(struct clock_event_device *evt)
> {
> unsigned long ctrl;
>
> - ctrl = readl(gt_base + GT_CONTROL);
> + ctrl = readl_relaxed(gt_base + GT_CONTROL);
> ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
> GT_CONTROL_AUTO_INC);
> - writel(ctrl, gt_base + GT_CONTROL);
> + writel_relaxed(ctrl, gt_base + GT_CONTROL);
> return 0;
> }
>
> @@ -212,11 +212,11 @@ static u64 notrace gt_sched_clock_read(void)
>
> static void __init gt_clocksource_init(void)
> {
> - writel(0, gt_base + GT_CONTROL);
> - writel(0, gt_base + GT_COUNTER0);
> - writel(0, gt_base + GT_COUNTER1);
> + writel_relaxed(0, gt_base + GT_CONTROL);
> + writel_relaxed(0, gt_base + GT_COUNTER0);
> + writel_relaxed(0, gt_base + GT_COUNTER1);
> /* enables timer on all the cores */
> - writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
> + writel_relaxed(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
>
> #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
> sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate);
More information about the linux-arm-kernel
mailing list