[PATCH] gpio: omap: fix debounce time calculation

[Felipe Balbi]

Hi,

Grygorii Strashko <grygorii.strashko at ti.com> writes:
> On 11/12/2015 08:09 PM, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Grygorii Strashko <grygorii.strashko at ti.com> writes:
>>> On 11/12/2015 07:50 PM, Felipe Balbi wrote:
>>>> According to TRM, debounce is measured in periods of
>>>> the functional clock of the GPIO IP. This means that
>>>
>>>
>>> What TRM? link pls.
>>>
>>> http://www.ti.com/lit/ug/spruhl7d/spruhl7d.pdf
>>>
>>> 28.4.1.24 GPIO_DEBOUNCINGTIME Register (offset = 154h) [reset = 0h]
>>>
>>> The GPIO_DEBOUNCINGTIME register controls debouncing time (the value is
>>> global for all ports). The debouncing cell is running with the
>>> debouncing clock (32 kHz), this register represents the number of the
>>> clock cycle(s) (31 s long) to be used.
>>>
>>> Debouncing Value in 31 microsecond steps.
>>> Debouncing Value = (DEBOUNCETIME + 1) * 31 microseconds.
>>
>> DRA7xx:
>>
>> "
>> 8-bit values specifying the debouncing time. It is n-
>> periods of the muxed clock, which can come from either
>> a true 32k oscillator/pad of from the system clock. It
>> depends on which boot mode is selected. For more
>> information see Chapter 32, Initialization.
>> "
>>
>
> See
> http://www.ti.com/lit/ug/spruhz6d/spruhz6d.pdf
> 27.4.3 General-Purpose Interface Clock Configuration
> 27.4.3.1 Clocking
>
> This completely unclear. Sry, I think this patch can't be used as is,
> first of all because of backward compatibility issues.

yeah, might be. No issues, I'll just go dig older TRMs and trying to
figure this one out. Meanwhile, let's let's keep it as is.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151112/bf68f282/attachment-0001.sig>