[PATCH 2/2] arm: boot: beaglex15: pass correct interrupt

Felipe Balbi balbi at ti.com
Thu Nov 12 09:53:01 PST 2015


According to latest schematics [1], GPIO_1/VBUSDET
on TPS659038 is tied to AM57x GPIO4_21. We can use
that as a VBUS interrupt, instead of relying on
PMIC's VBUS interrupts which don't seem to be firing
on x15 at all.

A follow up patch will add support for using this
GPIO-based interrupt mechanism for notifying about
VBUS.

[1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf

Signed-off-by: Felipe Balbi <balbi at ti.com>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 6f3a1a7ec5f9..5e47162f7883 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -560,6 +560,7 @@
 		extcon_usb2: tps659038_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
+			interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>;
 		};
 
 	};
-- 
2.6.2




More information about the linux-arm-kernel mailing list