[PATCH V4 2/4] dma: add Qualcomm Technologies HIDMA management driver
Andy Shevchenko
andy.shevchenko at gmail.com
Thu Nov 12 01:53:52 PST 2015
On Thu, Nov 12, 2015 at 8:41 AM, Sinan Kaya <okaya at codeaurora.org> wrote:
> The Qualcomm Technologies HIDMA device has been designed
> to support virtualization technology. The driver has been
> divided into two to follow the hardware design.
>
> 1. HIDMA Management driver
> 2. HIDMA Channel driver
>
> Each HIDMA HW consists of multiple channels. These channels
> share some set of common parameters. These parameters are
> initialized by the management driver during power up.
> Same management driver is used for monitoring the execution
> of the channels. Management driver can change the performance
> behavior dynamically such as bandwidth allocation and
> prioritization.
>
> The management driver is executed in hypervisor context and
> is the main management entity for all channels provided by
> the device.
>
> Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
> ---
> .../devicetree/bindings/dma/qcom_hidma_mgmt.txt | 61 ++++
> drivers/dma/qcom/Kconfig | 11 +
> drivers/dma/qcom/Makefile | 1 +
> drivers/dma/qcom/hidma_mgmt.c | 312 +++++++++++++++++++++
> drivers/dma/qcom/hidma_mgmt.h | 38 +++
> drivers/dma/qcom/hidma_mgmt_sys.c | 231 +++++++++++++++
> 6 files changed, 654 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> create mode 100644 drivers/dma/qcom/hidma_mgmt.c
> create mode 100644 drivers/dma/qcom/hidma_mgmt.h
> create mode 100644 drivers/dma/qcom/hidma_mgmt_sys.c
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> new file mode 100644
> index 0000000..eb053b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
> @@ -0,0 +1,61 @@
> +Qualcomm Technologies HIDMA Management interface
> +
> +The Qualcomm Technologies HIDMA device has been designed
> +to support virtualization technology. The driver has been
> +divided into two to follow the hardware design. The management
> +driver is executed in hypervisor context and is the main
> +management entity for all channels provided by the device.
> +
> +Each HIDMA HW consists of multiple channels. These channels
> +share some set of common parameters. These parameters are
> +initialized by the management driver during power up.
> +Same management driver is used for monitoring the execution
> +of the channels. Management driver can change the performance
> +behavior dynamically such as bandwidth allocation and
> +prioritization.
> +
> +All channel devices get probed in the hypervisor
> +context during power up. They show up as DMA engine
> +DMA channels. Then, before starting the virtualization; each
> +channel device is unbound from the hypervisor by VFIO
> +and assign to the guest machine for control.
> +
> +This management driver will be used by the system
> +admin to monitor/reset the execution state of the DMA
> +channels. This will be the management interface.
> +
> +
> +Required properties:
> +- compatible: "qcom,hidma-mgmt-1.0";
> +- reg: Address range for DMA device
> +- dma-channels: Number of channels supported by this DMA controller.
> +- max-write-burst-bytes: Maximum write burst in bytes. A memcpy requested is
> + fragmented to multiples of this amount.
> +- max-read-burst-bytes: Maximum read burst in bytes. A memcpy request is
> + fragmented to multiples of this amount.
> +- max-write-transactions: Maximum write transactions to perform in a burst
> +- max-read-transactions: Maximum read transactions to perform in a burst
> +- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
> +- channel-priority: Priority of the channel.
> + Each dma channel share the same HW bandwidth with other dma channels.
> + If two requests reach to the HW at the same time from a low priority and
> + high priority channel, high priority channel will claim the bus.
> + 0=low priority, 1=high priority
> +- channel-weight: Round robin weight of the channel
> + Since there are only two priority levels supported, scheduling among
> + the equal priority channels is done via weights.
> +
> +Example:
> +
> + hidma-mgmt at f9984000 = {
> + compatible = "qcom,hidma-mgmt-1.0";
> + reg = <0xf9984000 0x15000>;
> + dma-channels = 6;
> + max-write-burst-bytes = 1024;
> + max-read-burst-bytes = 1024;
> + max-write-transactions = 31;
> + max-read-transactions = 31;
> + channel-reset-timeout-cycles = 0x500;
> + channel-priority = < 1 1 0 0 0 0>;
> + channel-weight = < 1 13 10 3 4 5>;
> + };
> diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
> index 17545df..f3e2d4c 100644
> --- a/drivers/dma/qcom/Kconfig
> +++ b/drivers/dma/qcom/Kconfig
> @@ -7,3 +7,14 @@ config QCOM_BAM_DMA
> Enable support for the QCOM BAM DMA controller. This controller
> provides DMA capabilities for a variety of on-chip devices.
>
> +config QCOM_HIDMA_MGMT
> + tristate "Qualcomm Technologies HIDMA Management support"
> + select DMA_ENGINE
> + help
> + Enable support for the Qualcomm Technologies HIDMA Management.
> + Each DMA device requires one management interface driver
> + for basic initialization before QCOM_HIDMA channel driver can
> + start managing the channels. In a virtualized environment,
> + the guest OS would run QCOM_HIDMA channel driver and the
> + hypervisor would run the QCOM_HIDMA_MGMT management driver.
> +
> diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
> index f612ae3..1a5a96d 100644
> --- a/drivers/dma/qcom/Makefile
> +++ b/drivers/dma/qcom/Makefile
> @@ -1 +1,2 @@
> obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
> +obj-$(CONFIG_QCOM_HIDMA_MGMT) += hidma_mgmt.o hidma_mgmt_sys.o
> diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
> new file mode 100644
> index 0000000..8c3d059
> --- /dev/null
> +++ b/drivers/dma/qcom/hidma_mgmt.c
> @@ -0,0 +1,312 @@
> +/*
> + * Qualcomm Technologies HIDMA DMA engine Management interface
> + *
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/dmaengine.h>
> +#include <linux/acpi.h>
> +#include <linux/of.h>
> +#include <linux/property.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/uaccess.h>
> +#include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "hidma_mgmt.h"
> +
> +#define QOS_N_OFFSET 0x300
> +#define CFG_OFFSET 0x400
> +#define MAX_BUS_REQ_LEN_OFFSET 0x41C
> +#define MAX_XACTIONS_OFFSET 0x420
> +#define HW_VERSION_OFFSET 0x424
> +#define CHRESET_TIMEOUT_OFFSET 0x418
> +
> +#define MAX_WR_XACTIONS_MASK 0x1F
> +#define MAX_RD_XACTIONS_MASK 0x1F
> +#define WEIGHT_MASK 0x7F
> +#define MAX_BUS_REQ_LEN_MASK 0xFFFF
> +#define CHRESET_TIMEOUUT_MASK 0xFFFFF
> +
> +#define MAX_WR_XACTIONS_BIT_POS 16
> +#define MAX_BUS_WR_REQ_BIT_POS 16
> +#define WRR_BIT_POS 8
> +#define PRIORITY_BIT_POS 15
> +
> +#define AUTOSUSPEND_TIMEOUT 2000
> +#define MAX_CHANNEL_WEIGHT 15
> +
> +int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev)
> +{
> + unsigned int i;
> + u32 val;
> +
> + if (!is_power_of_2(mgmtdev->max_write_request) ||
> + (mgmtdev->max_write_request < 128) ||
> + (mgmtdev->max_write_request > 1024)) {
> + dev_err(&mgmtdev->pdev->dev, "invalid write request %d\n",
> + mgmtdev->max_write_request);
> + return -EINVAL;
> + }
> +
> + if (!is_power_of_2(mgmtdev->max_read_request) ||
> + (mgmtdev->max_read_request < 128) ||
> + (mgmtdev->max_read_request > 1024)) {
> + dev_err(&mgmtdev->pdev->dev, "invalid read request %d\n",
> + mgmtdev->max_read_request);
> + return -EINVAL;
> + }
> +
> + if (mgmtdev->max_wr_xactions > MAX_WR_XACTIONS_MASK) {
> + dev_err(&mgmtdev->pdev->dev,
> + "max_wr_xactions cannot be bigger than %d\n",
> + MAX_WR_XACTIONS_MASK);
> + return -EINVAL;
> + }
> +
> + if (mgmtdev->max_rd_xactions > MAX_RD_XACTIONS_MASK) {
> + dev_err(&mgmtdev->pdev->dev,
> + "max_rd_xactions cannot be bigger than %d\n",
> + MAX_RD_XACTIONS_MASK);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < mgmtdev->dma_channels; i++) {
> + if (mgmtdev->priority[i] > 1) {
> + dev_err(&mgmtdev->pdev->dev, "priority can be 0 or 1\n");
> + return -EINVAL;
> + }
> +
> + if (mgmtdev->weight[i] > MAX_CHANNEL_WEIGHT) {
> + dev_err(&mgmtdev->pdev->dev,
> + "max value of weight can be %d.\n",
> + MAX_CHANNEL_WEIGHT);
> + return -EINVAL;
> + }
> +
> + /* weight needs to be at least one */
> + if (mgmtdev->weight[i] == 0)
> + mgmtdev->weight[i] = 1;
> + }
> +
> + pm_runtime_get_sync(&mgmtdev->pdev->dev);
> + val = readl(mgmtdev->dev_virtaddr + MAX_BUS_REQ_LEN_OFFSET);
> + val &= ~(MAX_BUS_REQ_LEN_MASK << MAX_BUS_WR_REQ_BIT_POS);
> + val |= (mgmtdev->max_write_request << MAX_BUS_WR_REQ_BIT_POS);
> + val &= ~(MAX_BUS_REQ_LEN_MASK);
> + val |= (mgmtdev->max_read_request);
> + writel(val, mgmtdev->dev_virtaddr + MAX_BUS_REQ_LEN_OFFSET);
> +
> + val = readl(mgmtdev->dev_virtaddr + MAX_XACTIONS_OFFSET);
> + val &= ~(MAX_WR_XACTIONS_MASK << MAX_WR_XACTIONS_BIT_POS);
> + val |= (mgmtdev->max_wr_xactions << MAX_WR_XACTIONS_BIT_POS);
> + val &= ~(MAX_RD_XACTIONS_MASK);
> + val |= (mgmtdev->max_rd_xactions);
> + writel(val, mgmtdev->dev_virtaddr + MAX_XACTIONS_OFFSET);
> +
> + mgmtdev->hw_version = readl(mgmtdev->dev_virtaddr + HW_VERSION_OFFSET);
> + mgmtdev->hw_version_major = (mgmtdev->hw_version >> 28) & 0xF;
> + mgmtdev->hw_version_minor = (mgmtdev->hw_version >> 16) & 0xF;
> +
> + for (i = 0; i < mgmtdev->dma_channels; i++) {
> + val = readl(mgmtdev->dev_virtaddr + QOS_N_OFFSET + (4 * i));
> + val &= ~(1 << PRIORITY_BIT_POS);
> + val |= ((mgmtdev->priority[i] & 0x1) << PRIORITY_BIT_POS);
> + val &= ~(WEIGHT_MASK << WRR_BIT_POS);
> + val |= ((mgmtdev->weight[i] & WEIGHT_MASK) << WRR_BIT_POS);
> + writel(val, mgmtdev->dev_virtaddr + QOS_N_OFFSET + (4 * i));
> + }
> +
> + val = readl(mgmtdev->dev_virtaddr + CHRESET_TIMEOUT_OFFSET);
> + val &= ~CHRESET_TIMEOUUT_MASK;
> + val |= (mgmtdev->chreset_timeout_cycles & CHRESET_TIMEOUUT_MASK);
> + writel(val, mgmtdev->dev_virtaddr + CHRESET_TIMEOUT_OFFSET);
> +
> + pm_runtime_mark_last_busy(&mgmtdev->pdev->dev);
> + pm_runtime_put_autosuspend(&mgmtdev->pdev->dev);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(hidma_mgmt_setup);
> +
> +static int hidma_mgmt_probe(struct platform_device *pdev)
> +{
> + struct hidma_mgmt_dev *mgmtdev;
> + struct resource *dma_resource;
Just a nitpick (seems you like verbose names for variables): since
it's probe and you usually use the variable in a small scope no need
to prefix it. And you might reuse same variable later if needed.
> + void *dev_virtaddr;
> + int irq;
> + int rc;
> + u32 val;
> +
> + pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_get_sync(&pdev->dev);
> + dma_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!dma_resource) {
> + dev_err(&pdev->dev, "No memory resources found\n");
> + rc = -ENODEV;
> + goto out;
> + }
You forget to remove above piece.
> + dev_virtaddr = devm_ioremap_resource(&pdev->dev, dma_resource);
> + if (IS_ERR(dev_virtaddr)) {
> + dev_err(&pdev->dev, "can't map i/o memory\n");
This message is redundant. There is already one in core.
> + rc = -ENOMEM;
> + goto out;
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "irq resources not found\n");
> + rc = -ENODEV;
rc = irq; ?
> + goto out;
> + }
> +
> + mgmtdev = devm_kzalloc(&pdev->dev, sizeof(*mgmtdev), GFP_KERNEL);
> + if (!mgmtdev) {
> + rc = -ENOMEM;
> + goto out;
> + }
> +
> + mgmtdev->pdev = pdev;
> +
> + mgmtdev->dev_addrsize = resource_size(dma_resource);
> + mgmtdev->dev_virtaddr = dev_virtaddr;
> +
> + if (device_property_read_u32(&pdev->dev, "dma-channels",
> + &mgmtdev->dma_channels)) {
> + dev_err(&pdev->dev, "number of channels missing\n");
> + rc = -EINVAL;
Ditto, propagate error code. And below the similar.
> + goto out;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "channel-reset-timeout-cycles",
> + &mgmtdev->chreset_timeout_cycles)) {
> + dev_err(&pdev->dev, "channel reset timeout missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "max-write-burst-bytes",
> + &mgmtdev->max_write_request)) {
> + dev_err(&pdev->dev, "max-write-burst-bytes missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "max-read-burst-bytes",
> + &mgmtdev->max_read_request)) {
> + dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "max-write-transactions",
> + &mgmtdev->max_wr_xactions)) {
> + dev_err(&pdev->dev, "max-write-transactions missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "max-read-transactions",
> + &mgmtdev->max_rd_xactions)) {
> + dev_err(&pdev->dev, "max-read-transactions missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + mgmtdev->priority = devm_kcalloc(&pdev->dev,
> + mgmtdev->dma_channels, sizeof(*mgmtdev->priority), GFP_KERNEL);
> + if (!mgmtdev->priority) {
> + rc = -ENOMEM;
> + goto out;
> + }
> +
> + mgmtdev->weight = devm_kcalloc(&pdev->dev,
> + mgmtdev->dma_channels, sizeof(*mgmtdev->weight), GFP_KERNEL);
> + if (!mgmtdev->weight) {
> + rc = -ENOMEM;
> + goto out;
> + }
> +
> + if (device_property_read_u32_array(&pdev->dev, "channel-priority",
> + mgmtdev->priority, mgmtdev->dma_channels)) {
> + dev_err(&pdev->dev, "channel-priority missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + if (device_property_read_u32_array(&pdev->dev, "channel-weight",
> + mgmtdev->weight, mgmtdev->dma_channels)) {
> + dev_err(&pdev->dev, "channel-weight missing\n");
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + rc = hidma_mgmt_setup(mgmtdev);
> + if (rc) {
> + dev_err(&pdev->dev, "setup failed\n");
> + goto out;
> + }
> +
> + /* start the HW */
> + val = readl(mgmtdev->dev_virtaddr + CFG_OFFSET);
> + val |= 1;
> + writel(val, mgmtdev->dev_virtaddr + CFG_OFFSET);
> +
> +
> + rc = hidma_mgmt_init_sys(mgmtdev);
> + if (rc) {
> + dev_err(&pdev->dev, "sysfs setup failed\n");
> + goto out;
> + }
> +
> + dev_info(&pdev->dev,
> + "HW rev: %d.%d @ %pa with %d physical channels\n",
> + mgmtdev->hw_version_major, mgmtdev->hw_version_minor,
> + &dma_resource->start, mgmtdev->dma_channels);
> +
> + platform_set_drvdata(pdev, mgmtdev);
> + pm_runtime_mark_last_busy(&pdev->dev);
> + pm_runtime_put_autosuspend(&pdev->dev);
> + return 0;
> +out:
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_sync_suspend(&pdev->dev);
> + return rc;
> +}
> +
> +#if IS_ENABLED(CONFIG_ACPI)
> +static const struct acpi_device_id hidma_mgmt_acpi_ids[] = {
> + {"QCOM8060"},
> + {},
> +};
> +#endif
> +
> +static const struct of_device_id hidma_mgmt_match[] = {
> + { .compatible = "qcom,hidma-mgmt-1.0", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, hidma_mgmt_match);
> +
> +static struct platform_driver hidma_mgmt_driver = {
> + .probe = hidma_mgmt_probe,
> + .driver = {
> + .name = "hidma-mgmt",
> + .of_match_table = hidma_mgmt_match,
> + .acpi_match_table = ACPI_PTR(hidma_mgmt_acpi_ids),
> + },
> +};
> +module_platform_driver(hidma_mgmt_driver);
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/dma/qcom/hidma_mgmt.h b/drivers/dma/qcom/hidma_mgmt.h
> new file mode 100644
> index 0000000..d6f8fa0
> --- /dev/null
> +++ b/drivers/dma/qcom/hidma_mgmt.h
> @@ -0,0 +1,38 @@
> +/*
> + * Qualcomm Technologies HIDMA Management common header
> + *
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +struct hidma_mgmt_dev {
> + u8 hw_version_major;
> + u8 hw_version_minor;
> +
> + u32 max_wr_xactions;
> + u32 max_rd_xactions;
> + u32 max_write_request;
> + u32 max_read_request;
> + u32 dma_channels;
> + u32 chreset_timeout_cycles;
> + u32 hw_version;
> + u32 *priority;
> + u32 *weight;
> +
> + /* Hardware device constants */
> + void __iomem *dev_virtaddr;
> + resource_size_t dev_addrsize;
> +
> + struct platform_device *pdev;
> +};
> +
> +int hidma_mgmt_init_sys(struct hidma_mgmt_dev *dev);
> +int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev);
> diff --git a/drivers/dma/qcom/hidma_mgmt_sys.c b/drivers/dma/qcom/hidma_mgmt_sys.c
> new file mode 100644
> index 0000000..b125919
> --- /dev/null
> +++ b/drivers/dma/qcom/hidma_mgmt_sys.c
> @@ -0,0 +1,231 @@
> +/*
> + * Qualcomm Technologies HIDMA Management SYS interface
> + *
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/sysfs.h>
> +#include <linux/platform_device.h>
> +
> +#include "hidma_mgmt.h"
> +
> +struct fileinfo {
> + char *name;
> + int mode;
> + int (*get)(struct hidma_mgmt_dev *mdev);
> + int (*set)(struct hidma_mgmt_dev *mdev, u64 val);
> +};
> +
> +#define IMPLEMENT_GETSET(name) \
> +static int get_##name(struct hidma_mgmt_dev *mdev) \
> +{ \
> + return mdev->name; \
> +} \
> +static int set_##name(struct hidma_mgmt_dev *mdev, u64 val) \
> +{ \
> + u64 tmp; \
> + int rc; \
> + \
> + tmp = mdev->name; \
> + mdev->name = val; \
> + rc = hidma_mgmt_setup(mdev); \
> + if (rc) \
> + mdev->name = tmp; \
> + return rc; \
> +}
> +
> +#define DECLARE_ATTRIBUTE(name, mode) \
> + {#name, mode, get_##name, set_##name}
> +
> +IMPLEMENT_GETSET(hw_version_major)
> +IMPLEMENT_GETSET(hw_version_minor)
> +IMPLEMENT_GETSET(max_wr_xactions)
> +IMPLEMENT_GETSET(max_rd_xactions)
> +IMPLEMENT_GETSET(max_write_request)
> +IMPLEMENT_GETSET(max_read_request)
> +IMPLEMENT_GETSET(dma_channels)
> +IMPLEMENT_GETSET(chreset_timeout_cycles)
> +
> +static int set_priority(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
> +{
> + u64 tmp;
> + int rc;
> +
> + if (i > mdev->dma_channels)
>= ?
Here and below.
> + return -EINVAL;
> +
> + tmp = mdev->priority[i];
> + mdev->priority[i] = val;
> + rc = hidma_mgmt_setup(mdev);
> + if (rc)
> + mdev->priority[i] = tmp;
> + return rc;
> +}
> +
> +static int set_weight(struct hidma_mgmt_dev *mdev, unsigned int i, u64 val)
> +{
> + u64 tmp;
> + int rc;
> +
> + if (i > mdev->dma_channels)
> + return -EINVAL;
> +
> + tmp = mdev->weight[i];
> + mdev->weight[i] = val;
> + rc = hidma_mgmt_setup(mdev);
> + if (rc)
> + mdev->weight[i] = tmp;
> + return rc;
> +}
> +
> +static struct fileinfo files[] = {
> + DECLARE_ATTRIBUTE(hw_version_major, S_IRUGO),
> + DECLARE_ATTRIBUTE(hw_version_minor, S_IRUGO),
> + DECLARE_ATTRIBUTE(dma_channels, S_IRUGO),
> + DECLARE_ATTRIBUTE(chreset_timeout_cycles, S_IRUGO),
> + DECLARE_ATTRIBUTE(max_wr_xactions, (S_IRUGO|S_IWUGO)),
> + DECLARE_ATTRIBUTE(max_rd_xactions, (S_IRUGO|S_IWUGO)),
> + DECLARE_ATTRIBUTE(max_write_request, (S_IRUGO|S_IWUGO)),
> + DECLARE_ATTRIBUTE(max_read_request, (S_IRUGO|S_IWUGO)),
> +};
> +
> +static ssize_t show_values(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(files); i++) {
> + if (strcmp(attr->attr.name, files[i].name) == 0) {
> + sprintf(buf, "%d\n", files[i].get(mdev));
> + goto done;
> + }
> + }
> +
> + for (i = 0; i < mdev->dma_channels; i++) {
> + char name[30];
> +
> + sprintf(name, "channel%d_priority", i);
> + if (strcmp(attr->attr.name, name) == 0) {
> + sprintf(buf, "%d\n", mdev->priority[i]);
> + goto done;
> + }
> +
> + sprintf(name, "channel%d_weight", i);
> + if (strcmp(attr->attr.name, name) == 0) {
> + sprintf(buf, "%d\n", mdev->weight[i]);
> + goto done;
> + }
> + }
> +
> +done:
> + return strlen(buf);
> +}
> +
> +static ssize_t set_values(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct hidma_mgmt_dev *mdev = platform_get_drvdata(pdev);
> + unsigned long tmp;
> + unsigned int i;
> + int rc;
> +
> + rc = kstrtoul(buf, 0, &tmp);
> + if (rc)
> + return rc;
> +
> + for (i = 0; i < ARRAY_SIZE(files); i++) {
> + if (strcmp(attr->attr.name, files[i].name) == 0) {
> + rc = files[i].set(mdev, tmp);
> + if (rc)
> + return rc;
> +
> + goto done;
> + }
> + }
> +
> + for (i = 0; i < mdev->dma_channels; i++) {
> + char name[30];
> +
> + sprintf(name, "channel%d_priority", i);
> + if (strcmp(attr->attr.name, name) == 0) {
> + rc = set_priority(mdev, i, tmp);
> + if (rc)
> + return rc;
> + goto done;
> + }
> +
> + sprintf(name, "channel%d_weight", i);
> + if (strcmp(attr->attr.name, name) == 0) {
> + rc = set_weight(mdev, i, tmp);
> + if (rc)
> + return rc;
> + }
> + }
> +done:
> + return count;
> +}
> +
> +static int create_sysfs_entry(struct hidma_mgmt_dev *dev, char *name, int mode)
> +{
> + struct device_attribute *port_attrs;
> + char *name_copy;
> +
> + port_attrs = devm_kmalloc(&dev->pdev->dev,
> + sizeof(struct device_attribute), GFP_KERNEL);
> + if (!port_attrs)
> + return -ENOMEM;
> +
> + name_copy = devm_kstrdup(&dev->pdev->dev, name, GFP_KERNEL);
> + if (!name_copy)
> + return -ENOMEM;
> +
> + port_attrs->attr.name = name_copy;
> + port_attrs->attr.mode = mode;
> + port_attrs->show = show_values;
> + port_attrs->store = set_values;
> + sysfs_attr_init(&port_attrs->attr);
> +
> + return device_create_file(&dev->pdev->dev, port_attrs);
> +}
> +
> +
> +int hidma_mgmt_init_sys(struct hidma_mgmt_dev *dev)
> +{
> + unsigned int i;
> + int rc;
> +
> + for (i = 0; i < ARRAY_SIZE(files); i++) {
> + rc = create_sysfs_entry(dev, files[i].name, files[i].mode);
> + if (rc)
> + return rc;
> + }
> +
> + for (i = 0; i < dev->dma_channels; i++) {
> + char name[30];
> +
> + sprintf(name, "channel%d_priority", i);
> + rc = create_sysfs_entry(dev, name, (S_IRUGO|S_IWUGO));
> + if (rc)
> + return rc;
> +
> + sprintf(name, "channel%d_weight", i);
> + rc = create_sysfs_entry(dev, name, (S_IRUGO|S_IWUGO));
> + if (rc)
> + return rc;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(hidma_mgmt_init_sys);
> --
> Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
With Best Regards,
Andy Shevchenko
More information about the linux-arm-kernel
mailing list