[PATCH 2/6] ARM: OMAP2+: dts: cm-t335: add basic support for I2C
Uri Mashiach
uri.mashiach at compulab.co.il
Wed Nov 11 09:32:44 PST 2015
Gentle ping
On 27/10/15 14:14, Uri Mashiach wrote:
> From: Ilya Ledvich <ilya at compulab.co.il>
>
> Add pinmux configuration for I2C0 and I2C1 pins.
> Add description for I2C0 bus, set clock frequency to 400kHz.
> Add child nodes for 24c02 EEPROM and em3027 RTC on I2C0 bus.
>
> Acked-by: Igor Grinberg <grinberg at compulab.co.il>
> Signed-off-by: Ilya Ledvich <ilya at compulab.co.il>
> Signed-off-by: Uri Mashiach <uri.mashiach at compulab.co.il>
> ---
> arch/arm/boot/dts/am335x-cm-t335.dts | 37 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
> index 197d5ce..39df3d2 100644
> --- a/arch/arm/boot/dts/am335x-cm-t335.dts
> +++ b/arch/arm/boot/dts/am335x-cm-t335.dts
> @@ -37,6 +37,24 @@
> pinctrl-names = "default";
> pinctrl-0 = <>;
>
> + i2c0_pins: pinmux_i2c0_pins {
> + pinctrl-single,pins = <
> + /* i2c0_sda.i2c0_sda */
> + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0)
> + /* i2c0_scl.i2c0_scl */
> + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0)
> + >;
> + };
> +
> + i2c1_pins: pinmux_i2c1_pins {
> + pinctrl-single,pins = <
> + /* uart0_ctsn.i2c1_sda */
> + 0x168 (PIN_INPUT_PULLUP | MUX_MODE2)
> + /* uart0_rtsn.i2c1_scl */
> + 0x16c (PIN_INPUT_PULLUP | MUX_MODE2)
> + >;
> + };
> +
> gpio_led_pins: pinmux_gpio_led_pins {
> pinctrl-single,pins = <
> 0x88 (PIN_OUTPUT | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
> @@ -60,3 +78,22 @@
> status = "okay";
> };
>
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> +
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + eeprom: 24c02 at 50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> +
> + ext_rtc: em3027 at 56 {
> + compatible = "emmicro,em3027";
> + reg = <0x56>;
> + };
> +};
> +
>
More information about the linux-arm-kernel
mailing list