[PATCH v3 2/7] spi: imx: replace fixed timeout with calculated one
Sascha Hauer
s.hauer at pengutronix.de
Wed Nov 11 00:12:15 PST 2015
On Tue, Nov 10, 2015 at 09:20:06PM +0100, Anton Bondarenko wrote:
>
>
> On 05.11.2015 09:47, Sascha Hauer wrote:
> >>@@ -890,12 +891,40 @@ static void spi_imx_dma_tx_callback(void *cookie)
> >> complete(&spi_imx->dma_tx_completion);
> >> }
> >>
> >>+static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
> >>+{
> >>+ unsigned long coef1 = 1;
> >>+ unsigned long coef2 = MSEC_PER_SEC;
> >>+ unsigned long timeout = 0;
> >>+
> >>+ /* Swap coeficients to avoid div by 0 */
> >>+ if (spi_imx->spi_bus_clk < MSEC_PER_SEC) {
> >>+ coef1 = MSEC_PER_SEC;
> >>+ coef2 = 1;
> >>+ }
> >>+
> >>+ /* Time with actual data transfer */
> >>+ timeout += DIV_ROUND_UP(8 * size * coef1,
> >>+ spi_imx->spi_bus_clk / coef2);
> >>+
> >>+ /* Take CS change delay related to HW */
> >>+ timeout += DIV_ROUND_UP((size - 1) * 4 * coef1,
> >>+ spi_imx->spi_bus_clk / coef2);
> >>+
> >>+ /* Add extra second for scheduler related activities */
> >>+ timeout += MSEC_PER_SEC;
> >>+
> >>+ /* Double calculated timeout */
> >>+ return msecs_to_jiffies(2 * timeout);
> >>+}
> >
> >I think you can simplify this function to:
> >
> > timeout = size * 8 / spi_imx->spi_bus_clk;
> > timeout += 2;
> >
> > return msecs_to_jiffies(timeout * MSEC_PER_SEC);
> >
> >The rationale is that when size * 8 / spi_imx->spi_bus_clk is 0 then we
> >can add another second and be fine. No need to calculate this more
> >accurate, in the end it's important to catch the timeout. If we do this
> >one or two seconds too late doesn't matter.
> >
> >Sascha
> >
>
> Sascha,
>
> What about something like this:
> timeout = size * (8 + 4) / spi_imx->spi_bus_clk;
> timeout += 2;
>
> return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
>
> I think we still need to take into account 4 CLKs between each burst.
Fine with me.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list