[PATCH v2 1/2] i2c: mediatek: add i2c first write then read optimization
Andy Shevchenko
andy.shevchenko at gmail.com
Mon Nov 9 06:25:09 PST 2015
On Mon, Nov 9, 2015 at 7:43 AM, Liguo Zhang <liguo.zhang at mediatek.com> wrote:
> For platform with auto restart support, between every transfer,
> i2c controller will trigger an interrupt and SW need to handle
> it to start new transfer. When doing write-then-read transfer,
> instead of restart mechanism, using WRRD mode to have controller
> send both transfer in one request to reduce latency.
> @@ -518,6 +529,16 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
> if (ret)
> return ret;
>
> + i2c->auto_restart = i2c->dev_comp->auto_restart;
> +
> + /* checking if we can skip restart and optimize using WRRD mode */
> + if (i2c->auto_restart && num == 2) {
> + if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
> + msgs[0].addr == msgs[1].addr) {
Nitpick (optional):
((msgs[0].flags & msgs[1].flags) & I2C_M_RD)
?
> + i2c->auto_restart = 0;
> + }
> + }
--
With Best Regards,
Andy Shevchenko
More information about the linux-arm-kernel
mailing list