[PATCH v3 3/3] ARM: dts: sun4i: gemei-g9: Enable sun4i audio codec support
Chen-Yu Tsai
wens at csie.org
Sun Nov 8 19:59:26 PST 2015
On Sat, Nov 7, 2015 at 1:54 AM, Priit Laes <plaes at plaes.org> wrote:
> Gemei G9 has internal speakers and headphone jack. Audio switching
> from internal speakers to headphones is automatically handled by
> extra FT2012Q audio amplifier chip that works out of the box.
Nice that it works out of the box. The FEX file does mention:
audio_pa_ctrl = port:PH15<1><default><default><0>
So either it is floating or pulled up by default? Since it works
now I don't see any reason to block it. On the other hand once
that binding is introduced it would be nice to add it for power
management reasons.
Acked-by: Chen-Yu Tsai <wens at csie.org>
> Signed-off-by: Priit Laes <plaes at plaes.org>
> ---
> Changes since v2:
> - Dropped routing property.
>
> arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
> index 16c1a67..1d73a98 100644
> --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
> @@ -65,12 +65,15 @@
> /*
> * TODO:
> * 2x cameras via CSI
> - * audio
> + * audio input
> * AXP battery management
> * NAND
> * OTG
> * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
> */
> +&codec {
> + status = "okay";
> +};
>
> &cpu0 {
> cpu-supply = <®_dcdc2>;
> --
> 2.6.3
>
More information about the linux-arm-kernel
mailing list