[RFC PATCH 0/3]perf/core: extend perf_reg and perf_sample_regs_intr

[Madhavan Srinivasan]

On Friday 06 November 2015 03:34 PM, Michael Ellerman wrote:
> On Fri, 2015-11-06 at 10:24 +0100, Peter Zijlstra wrote:
>> On Fri, Nov 06, 2015 at 12:57:17PM +0530, Madhavan Srinivasan wrote:
>>> On Thursday 05 November 2015 06:37 PM, Peter Zijlstra wrote:
>>>> On Thu, Nov 05, 2015 at 02:16:15AM +0530, Madhavan Srinivasan wrote:
>>>>> Second patch updates struct arch_misc_reg for arch/powerpc with pmu registers
>>>>> and adds offsetof macro for the same. It extends perf_reg_value()
>>>>> to use reg idx to decide on struct to return value from.
>>>> Why; what's in those regs?
>>> Was out and did not have access to mail, so missed to respond in time.
>>>
>>> In current implementation of patch 2, have added 
>>> few pmu control/status and counter registers,
>>> which give additional information about the PMU context
>>> for the sample.
>> Yes, I saw that, you still haven't answered the question though. What is
>> in those regs? Why is exposing that information like this the best
>> option.
> It's a perrenial request from our hardware PMU folks to be able to see the raw
> values of the PMU registers.
>
> I think partly it's so that they can verify that perf is doing what they want,
> and some of it is that they're interested in some of the more obscure info that
> isn't plumbed out through other perf interfaces.
>
> We've used various internal hacks over the years to keep them happy. This is an
> attempt to use a somewhat standard mechanism.
>
> It would also be helpful for those of us working on the perf hardware backends,
> to be able to verify that we're programming things correctly, without resorting
> to debug printks etc.
>
> Basically we want to sample regs at the time of the perf interrupt, so we
> though PERF_SAMPLE_REGS_INTR made senes :)
>
> But if you think this is the wrong mechanism within perf, then please let us
> know.
>
> I know perf's mission is to abstract as much of the arcane hardware details
> into a generic interface and make PMUs actually useful for normal folks, and we
> are committed to that, but it would also be useful to be able to get the raw
> values for a different type of user.
>
> Maddy's patch only exports PMC1-6 and MMCR0/1. I think we also need to export
> some others, in particular MMCRA has a lot of stuff in it, half of which is not
> even architected. So that would have to be exported as "POWER8_MMCRA". And then
> there's the SIAR/SDAR/SIER which contain a bunch of info on sampled
> instructions that is not currently plumbed out.

Sure. I will rework the patch to include the other regs also.

Maddy

>
> cheers
>