[PATCH v3 1/2] arm64: dts: exynos7: Add PMIC S2MPS15 device tree node
Alim Akhtar
alim.akhtar at samsung.com
Thu Nov 5 19:06:39 PST 2015
This patch adds PMIC (S2MPS15) node of espresso board,
which includes addition of regulators and pmic-clk sub-nodes.
This patch also adds {vmmc,vqmmc}-supply properties for mmc2 node.
Signed-off-by: Abhilash Kesavan <a.kesavan at samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
---
Changes since v2:
* Addressed Krzysztof comments.
Changes since v1:
* Addressed Javier and Krzysztof review comments.
* Removed unused ldo/buck nodes.
* Removed always-on properties from ldo/buck to disable them
* Added a consumer of pmic supply (like mmc)
arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 280 +++++++++++++++++++++++
1 file changed, 280 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 5424cc450f72..f5a3da50ac57 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -52,6 +53,283 @@
status = "okay";
};
+&hsi2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <200000>;
+ status = "okay";
+
+ s2mps15_pmic at 66 {
+ compatible = "samsung,s2mps15-pmic";
+ reg = <0x66>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpa0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq>;
+ wakeup-source;
+
+ s2mps15_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "vqmmc-sdcard";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vdd_ldo4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1110000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <2250000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "vmmc-sdcard";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "vdd_ldo18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_ldo19";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "vdd_ldo21";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "vdd_ldo23";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_ldo25";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1470000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "vdd_ldo27";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_atlas";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_buck5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_buck7";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_buck8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_buck9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_buck10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+ };
+ };
+};
+
+&pinctrl_alive {
+ pmic_irq: pmic-irq {
+ samsung,pins = "gpa0-2";
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -80,5 +358,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
+ vmmc-supply = <&ldo17_reg>;
+ vqmmc-supply = <&ldo2_reg>;
disable-wp;
};
--
1.7.10.4
More information about the linux-arm-kernel
mailing list