[RFCv2 1/2] power: domain: add pm_genpd_uninit

[Alexander Aring]

On Thu, Nov 05, 2015 at 10:01:32AM +0100, Ulf Hansson wrote:
> On 3 November 2015 at 23:45, Alexander Aring <alex.aring at gmail.com> wrote:
> > This patch adds function pm_genpd_uninit for undo a pm_genpd_init. This
> > is useful for multiple power domains while probing. If the probing fails
> > after one pm_genpd_init was called we need to undo all previous
> > registrations of generic pm domains inside the gpd_list list.
> 
> Yes, agree. Although I think it's a bit mote complicated than what you
> suggest in this simple approach. :-)
> 

ok.

> >
> > There is a check on IS_ERR_OR_NULL(genpd) which is useful to check again
> > registered power domains and not registered domains, the driver can use
> > this mechanism to have an array with registered and non-registered power
> > domains, where non-registered power domains are NULL.
> >
> > Cc: Rafael J. Wysocki <rjw at rjwysocki.net>
> > Cc: Kevin Hilman <khilman at kernel.org>
> > Cc: Ulf Hansson <ulf.hansson at linaro.org>
> > Cc: Pavel Machek <pavel at ucw.cz>
> > Cc: Len Brown <len.brown at intel.com>
> > Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> > Signed-off-by: Alexander Aring <alex.aring at gmail.com>
> > ---
> >  drivers/base/power/domain.c | 15 +++++++++++++++
> >  include/linux/pm_domain.h   |  4 ++++
> >  2 files changed, 19 insertions(+)
> >
> > diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> > index 16550c6..65b9d1a 100644
> > --- a/drivers/base/power/domain.c
> > +++ b/drivers/base/power/domain.c
> > @@ -1730,6 +1730,21 @@ void pm_genpd_init(struct generic_pm_domain *genpd,
> >  }
> >  EXPORT_SYMBOL_GPL(pm_genpd_init);
> >
> > +/**
> > + * pm_genpd_uninit - Uninitialize a generic I/O PM domain object.
> > + * @genpd: PM domain object to initialize.
> > + */
> > +void pm_genpd_uninit(struct generic_pm_domain *genpd)
> > +{
> > +       if (IS_ERR_OR_NULL(genpd))
> > +               return;
> > +
> > +       mutex_lock(&gpd_list_lock);
> > +       list_del(&genpd->gpd_list_node);
> > +       mutex_unlock(&gpd_list_lock);
> 
> This is too fragile. You don't protect from the cases below.
> 
> 1. The genpd may have devices attached to it.
> 2. The genpd may have subdomains.
> 
> To deal with these case, that's when it becomes more complex which I
> guess is the reason to why nobody really cared until now.
> 

Can we not just undo the things which pm_genpd_init does, then let the
driver to deal with all other uninitialize of e.g. "subdomains" which might
the driver has initialize before? We know there are no slaves or something
else which is empty because pm_genpd_init runs INIT_LIST_HEAD, or not?

To make such handling above I would add some:

"pm_genpd_uninit_recursive" function, which cleanup everything from a
power domain, e.g. subdomains, etc and other lists.

What do you suggest to me for e.g. the raspberrypi power domain driver,
also simple ignore such error handling?


For my current use-case I can remove the failure between pm_genpd_init by
simple getting all "power states" (the bool is_off for pm_genpd_init),
before calling pm_genpd_init. In this case I don't have any failure between
calling pm_genpd_init when another pm_genpd_init was before.

Looks like this:

1. get all states from firmware to get parameter "is_off", which can fail.
   We should get here the states for the power domains which we want to
   register only.

2. Then call pm_genpd_init, which cannot be fail between another
   pm_genpd_init. (There are only void functions in the middle, which cannot
   fail). If I call pm_genpd_init, I use "is_off" variable from the step
   of "1.".


But then I have still the call of "of_genpd_add_provider_onecell" at the end
of probing which can fail. So this is also not a valid solution, because
I need to undo everything before.

> Moreover, I think there are some more structures to "uninitialize"
> besides just unlinking the genpd struct from the gpd list. For example
> a mutex_destroy() should be done.
> 

yes, of course.

- Alex