[PATCH v2 08/20] arm64: Use generic copy_siginfo_{to,from}_user32

[Amanieu d'Antras]

Signed-off-by: Amanieu d'Antras <amanieu at gmail.com>
---
 arch/arm64/include/asm/compat.h |  3 --
 arch/arm64/kernel/signal32.c    | 85 -----------------------------------------
 2 files changed, 88 deletions(-)

diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index dc7cfc1..824be1dd 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -155,9 +155,6 @@ typedef union compat_sigval {
 	compat_uptr_t	sival_ptr;
 } compat_sigval_t;
 
-#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
-#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
-
 #define COMPAT_OFF_T_MAX	0x7fffffff
 #define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
 
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index 71ef6dc..2a69815 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -125,91 +125,6 @@ static inline int get_sigset_t(sigset_t *set,
 	return 0;
 }
 
-int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
-{
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, to, sizeof(*to)))
-		return -EFAULT;
-
-	/* If you change siginfo_t structure, please be sure
-	 * this code is fixed accordingly.
-	 * It should never copy any pad contained in the structure
-	 * to avoid security leaks, but must copy the generic
-	 * 3 ints plus the relevant union member.
-	 * This routine must convert siginfo from 64bit to 32bit as well
-	 * at the same time.
-	 */
-	err = __put_user(from->si_signo, &to->si_signo);
-	err |= __put_user(from->si_errno, &to->si_errno);
-	err |= __put_user((short)from->si_code, &to->si_code);
-	if (from->si_code < 0)
-		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
-				      SI_PAD_SIZE);
-	else switch (from->si_code & __SI_MASK) {
-	case __SI_KILL:
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		break;
-	case __SI_TIMER:
-		 err |= __put_user(from->si_tid, &to->si_tid);
-		 err |= __put_user(from->si_overrun, &to->si_overrun);
-		 err |= __put_user(from->si_int, &to->si_int);
-		break;
-	case __SI_POLL:
-		err |= __put_user(from->si_band, &to->si_band);
-		err |= __put_user(from->si_fd, &to->si_fd);
-		break;
-	case __SI_FAULT:
-		err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
-				  &to->si_addr);
-#ifdef BUS_MCEERR_AO
-		/*
-		 * Other callers might not initialize the si_lsb field,
-		 * so check explicitely for the right codes here.
-		 */
-		if (from->si_signo == SIGBUS &&
-		    (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
-			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
-#endif
-		break;
-	case __SI_CHLD:
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user(from->si_status, &to->si_status);
-		err |= __put_user(from->si_utime, &to->si_utime);
-		err |= __put_user(from->si_stime, &to->si_stime);
-		break;
-	case __SI_RT: /* This is not generated by the kernel as of now. */
-	case __SI_MESGQ: /* But this is */
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user(from->si_int, &to->si_int);
-		break;
-	case __SI_SYS:
-		err |= __put_user((compat_uptr_t)(unsigned long)
-				from->si_call_addr, &to->si_call_addr);
-		err |= __put_user(from->si_syscall, &to->si_syscall);
-		err |= __put_user(from->si_arch, &to->si_arch);
-		break;
-	default: /* this is just in case for now ... */
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		break;
-	}
-	return err;
-}
-
-int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
-{
-	if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
-	    copy_from_user(to->_sifields._pad,
-			   from->_sifields._pad, SI_PAD_SIZE))
-		return -EFAULT;
-
-	return 0;
-}
-
 /*
  * VFP save/restore code.
  *
-- 
2.6.2