[RFCv2 0/2] rpi: add support for rpi power domain driver
Alexander Aring
alex.aring at gmail.com
Tue Nov 3 14:45:09 PST 2015
Hi,
this patch series contains at first a patch for the power domain subsystem
which offers to uninit generic power domains when init was called before.
The RPi Power-Domains need to be enabled/disabled by interacting with the
RPi firmware which can fail. To cleanup the probing we need to undo the
power domains again which was registered before.
- Alex
Alexander Aring (2):
power: domain: add pm_genpd_uninit
rpi: add support to enable usb power domain
.../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 25 +++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 ++
arch/arm/boot/dts/bcm2835.dtsi | 2 +-
arch/arm/mach-bcm/Kconfig | 10 ++
arch/arm/mach-bcm/Makefile | 1 +
arch/arm/mach-bcm/raspberrypi-power.c | 180 +++++++++++++++++++++
drivers/base/power/domain.c | 15 ++
include/dt-bindings/arm/raspberrypi-power.h | 14 ++
include/linux/pm_domain.h | 4 +
9 files changed, 261 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
create mode 100644 include/dt-bindings/arm/raspberrypi-power.h
--
2.6.1
More information about the linux-arm-kernel
mailing list