[PATCH] arm64: Increase the max granular size

[Catalin Marinas]

On Tue, Nov 03, 2015 at 12:07:06PM +0100, Geert Uytterhoeven wrote:
> On Wed, Oct 28, 2015 at 8:09 PM, Catalin Marinas
> <catalin.marinas at arm.com> wrote:
> > On Tue, Sep 22, 2015 at 07:59:48PM +0200, Robert Richter wrote:
> >> From: Tirumalesh Chalamarla <tchalamarla at cavium.com>
> >>
> >> Increase the standard cacheline size to avoid having locks in the same
> >> cacheline.
> >>
> >> Cavium's ThunderX core implements cache lines of 128 byte size. With
> >> current granulare size of 64 bytes (L1_CACHE_SHIFT=6) two locks could
> >> share the same cache line leading a performance degradation.
> >> Increasing the size fixes that.
> >>
> >> Increasing the size has no negative impact to cache invalidation on
> >> systems with a smaller cache line. There is an impact on memory usage,
> >> but that's not too important for arm64 use cases.
> >>
> >> Signed-off-by: Tirumalesh Chalamarla <tchalamarla at cavium.com>
> >> Signed-off-by: Robert Richter <rrichter at cavium.com>
> >
> > Applied. Thanks.
> 
> This patch causes a BUG() on r8a7795/salvator-x, for which support is not
> yet upstream.
> 
> My config (attached) uses SLAB. If I switch to SLUB, it works.
> The arm64 defconfig works, even if I switch from SLUB to SLAB.
[...]
> ------------[ cut here ]------------
> kernel BUG at mm/slab.c:2283!
> Internal error: Oops - BUG: 0 [#1] SMP
[...]
> Call trace:
> [<ffffffc00014f9b4>] __kmem_cache_create+0x21c/0x280
> [<ffffffc00068be50>] create_boot_cache+0x4c/0x80
> [<ffffffc00068bed8>] create_kmalloc_cache+0x54/0x88
> [<ffffffc00068bfc0>] create_kmalloc_caches+0x50/0xf4
> [<ffffffc00068db08>] kmem_cache_init+0x104/0x118
> [<ffffffc00067d7d8>] start_kernel+0x218/0x33c

I haven't managed to reproduce this on a Juno kernel. Could you please
add some debug printing to see what's being passed to kmalloc_slab()?
The freelist_size getting out of bounds?

-- 
Catalin