[PATCH v4 0/8] qcom: Add support for TSENS driver
Eduardo Valentin
edubezval at gmail.com
Mon Nov 2 12:13:47 PST 2015
Rajendra,
On Fri, Oct 09, 2015 at 03:11:02PM +0530, Rajendra Nayak wrote:
> Patches 1/8 to 4/8 will need to go via the thermal tree/Eduardo.
> Patches 5/8 to 8/8 will need to go via qcom-msm tree/Andy.
>
> Eduardo, can you please take a look at the patches and let me
> know if you see any issues.
>
Thanks for your taking this over. I am assuming this superseeds the
work by Narendran.
Thanks.
> Current set of patches apply on 4.3-rc4. Need to pull in clk-next
> (for a dependent patch) to be able to test on ifc6410 board.
>
> Changes since v3:
> * Dropped 'clk: qcom: create virtual child device for TSENS' which
> is picked up by Stephen
> * Updated GCC bindings with optional TSENS properties
>
> Changes since v2:
> * Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
>
> Changes since v1:
> * Created virtual tsens device from gcc driver for 8960,
> with DT having a single node for gcc and tsens
> * Minor fixes with rebasing on 4.3-rc1
>
> Changes since RFC:
> * Added support for 8916 and 8084
> * Based off the latest nvmem framework patches [1]
> * Minor review fixes for comments mostly from Lina
>
> This is an attempt to have a single TSENS driver for
> the different versions of the TSENS IP that exist, on
> different qcom msm/apq SoCs'
> Support is added for msm8916, msm8960 and msm8974 families.
>
> A lot of the work is based of original code from Stephen Boyd
> and Siddartha Mohanadoss. I have also picked some of what
> Narendran Rajan did in his attempt to upstream the support
> for 8960 family. I could not keep the original authorship on
> any of the patches because I ended up moving the code around
> quite a bit in an effort to have a single driver for the
> various devices. I would be glad to change the authorship
> for any of the patches if needed.
>
> Rajendra Nayak (8):
> thermal: qcom: tsens: Add a skeletal TSENS drivers
> thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
> thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
> thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
> arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
> arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
> arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
> arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
>
> .../devicetree/bindings/clock/qcom,gcc.txt | 20 ++
> .../devicetree/bindings/thermal/qcom-tsens.txt | 33 +++
> arch/arm/boot/dts/qcom-apq8064.dtsi | 101 +++++++
> arch/arm/boot/dts/qcom-apq8084.dtsi | 105 ++++++++
> arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++
> drivers/thermal/Kconfig | 5 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/qcom/Kconfig | 10 +
> drivers/thermal/qcom/Makefile | 2 +
> drivers/thermal/qcom/tsens-8916.c | 107 ++++++++
> drivers/thermal/qcom/tsens-8960.c | 291 +++++++++++++++++++++
> drivers/thermal/qcom/tsens-8974.c | 239 +++++++++++++++++
> drivers/thermal/qcom/tsens-common.c | 130 +++++++++
> drivers/thermal/qcom/tsens.c | 206 +++++++++++++++
> drivers/thermal/qcom/tsens.h | 69 +++++
> 16 files changed, 1490 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> create mode 100644 drivers/thermal/qcom/Kconfig
> create mode 100644 drivers/thermal/qcom/Makefile
> create mode 100644 drivers/thermal/qcom/tsens-8916.c
> create mode 100644 drivers/thermal/qcom/tsens-8960.c
> create mode 100644 drivers/thermal/qcom/tsens-8974.c
> create mode 100644 drivers/thermal/qcom/tsens-common.c
> create mode 100644 drivers/thermal/qcom/tsens.c
> create mode 100644 drivers/thermal/qcom/tsens.h
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
More information about the linux-arm-kernel
mailing list