[PATCH 2/6] ARM: dts: imx: Add Advantech BA-16 Qseven module
Lucas Stach
l.stach at pengutronix.de
Mon Nov 2 00:57:43 PST 2015
Am Donnerstag, den 29.10.2015, 19:16 -0400 schrieb Akshay Bhat:
> From: Justin Waters <justin.waters at timesys.com>
>
> Add support for Advantech BA-16 module based on iMX6D processor
>
> http://www2.advantech.com/products/medical_computing_system/dms-ba16/mod_64aa1566-169c-483d-97c8-c2c22c163fc3.aspx
> Signed-off-by: Akshay Bhat <akshay.bhat at timesys.com>
> ---
> arch/arm/boot/dts/imx6q-ba16.dtsi | 559 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 559 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
> new file mode 100644
> index 0000000..3d47039
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
> @@ -0,0 +1,559 @@
> +/*
> + * Support for imx6 based Advantech DMS-BA16 Qseven module
> + *
> + * Copyright 2015 Timesys Corporation.
> + * Copyright 2015 GE Healthcare.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include "imx6q.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + memory {
> + reg = <0x10000000 0x40000000>;
> + };
> +
> + clocks {
> + clk24m: clk24m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> +
> + reg_usb_otg_vbus: regulator at 1 {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + reg_usb_h1_vbus: regulator at 2 {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_h1_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + reg_1p8v: regulator at 3 {
> + compatible = "regulator-fixed";
> + regulator-name = "1P8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + reg_3p3v: regulator at 4 {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + lvds_ppen: regulator at 5 {
> + compatible = "regulator-fixed";
> + regulator-name = "lvds_ppen";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> + };
> +
> + backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> + 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29
> + 30 31 32 33 34 35 36 37 38 39
> + 40 41 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57 58 59
> + 60 61 62 63 64 65 66 67 68 69
> + 70 71 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87 88 89
> + 90 91 92 93 94 95 96 97 98 99
> + 100 101 102 103 104 105 106 107 108 109
> + 110 111 112 113 114 115 116 117 118 119
> + 120 121 122 123 124 125 126 127 128 129
> + 130 131 132 133 134 135 136 137 138 139
> + 140 141 142 143 144 145 146 147 148 149
> + 150 151 152 153 154 155 156 157 158 159
> + 160 161 162 163 164 165 166 167 168 169
> + 170 171 172 173 174 175 176 177 178 179
> + 180 181 182 183 184 185 186 187 188 189
> + 190 191 192 193 194 195 196 197 198 199
> + 200 201 202 203 204 205 206 207 208 209
> + 210 211 212 213 214 215 216 217 218 219
> + 220 221 222 223 224 225 226 227 228 229
> + 230 231 232 233 234 235 236 237 238 239
> + 240 241 242 243 244 245 246 247 248 249
> + 250 251 252 253 254 255>;
> + default-brightness-level = <255>;
> + enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
> + power-supply = <&lvds_ppen>;
> + };
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +};
> +
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + flash: n25q032 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + spi-max-frequency = <20000000>;
> + reg = <0>;
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0x0 0xC0000>;
> + };
> + partition at C0000 {
> + label = "env";
> + reg = <0xC0000 0x10000>;
> + };
> + partition at D0000 {
> + label = "spare";
> + reg = <0xD0000 0x130000>;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii";
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c2>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + pmic at 58 {
> + compatible = "dlg,da9063";
> + reg = <0x58>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
> +
> + regulators {
> + vdd_bcore1: bcore1 {
> + regulator-min-microvolt = <1420000>;
> + regulator-max-microvolt = <1420000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_bcore2: bcore2 {
> + regulator-min-microvolt = <1420000>;
> + regulator-max-microvolt = <1420000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_bpro: bpro {
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_bmem: bmem {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_bio: bio {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_bperi: bperi {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo1: ldo1 {
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1860000>;
> + };
> +
> + vdd_ldo2: ldo2 {
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1860000>;
> + };
> +
> + vdd_ldo3: ldo3 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3440000>;
> + };
> +
> + vdd_ldo4: ldo4 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3440000>;
> + };
> +
> + vdd_ldo5: ldo5 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo6: ldo6 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo7: ldo7 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo8: ldo8 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo9: ldo9 {
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo10: ldo10 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ldo11: ldo11 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
There is a suspiciously high number of always-on regulators in the list
above. Are they really required to be powered on always, or are we
lacking supplies on some of the devices below?
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + imx6q-ba16 {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* uSDHC2 CD */
> + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 /* uSDHC4 CD */
> + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 /* uSDHC4 SDIO PWR */
> + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 /* uSDHC4 SDIO WP */
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000 /* uSDHC4 SDIO LED */
> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 /* SPI1 CS */
> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIe Reset */
> + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* PCIe Wake */
> + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* FEC CLK */
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* FEC Reset */
> + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 /* GPIO0 */
> + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 /* GPIO1 */
> + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* GPIO2 */
> + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 /* GPIO3 */
> + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 /* GPIO4 */
> + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 /* GPIO5 */
> + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* GPIO6 */
> + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* GPIO7 */
> + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 /* CAM_PWDN */
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAM_RST */
> + MX6QDL_PAD_GPIO_9__WDOG1_B 0x80000000 /* Watchdog out */
> + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x80000000 /* HUB_RESET */
> + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC Interrupt */
> + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* AR8033 Interrupt */
> + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x80000000 /* SUS_S3_OUT */
> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* BLEN_OUT */
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* LVDS_PPEN_OUT */
> + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* RTC_INT */
Please don't overuse the hog group but add pins that are related to a
specific device to the pinmux group of that device. USDHC, SPI, PCIe,
FEC are the obvious examples from the list above.
> + >;
> + };
> +
> + pinctrl_usdhc4: usdhc4grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
> + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
> + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
> + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
> + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
> + >;
> + };
> +
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
> + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
> + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
> + >;
> + };
> +
> + pinctrl_ecspi5: ecspi5rp-1 {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
> + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
> + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
> + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc3_reset: usdhc3grp-reset {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
> + >;
> + };
> +
> + pinctrl_audmux: audmux {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
> + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
> + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
> + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
> + >;
> + };
> +
> + pinctrl_enet: pinctrl_enet {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> + >;
> + };
> + };
> +};
> +
> +&pcie {
> + power-on-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
There is no such thing as a power-on-gpio in mainline Linux.
> + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm2>;
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-master";
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +&usbh1 {
> + vbus-supply = <®_usb_h1_vbus>;
> + reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
> + no-1-8-v;
> + keep-power-in-suspend;
> + enable-sdio-wakeup;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
> + bus-width = <8>;
> + vmmc-supply = <&vdd_bperi>;
> + vqmmc-supply = <&vdd_bio>;
> + non-removable;
> + keep-power-in-suspend;
> + status = "okay";
> +};
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list