[PATCH v11 0/4] Allow USB devices to remain runtime-suspended when sleeping

Rafael J. Wysocki rjw at rjwysocki.net
Sun Nov 1 17:50:40 PST 2015


On Tuesday, October 27, 2015 03:38:47 PM Tomeu Vizoso wrote:
> Hi,
> 
> this is v11 of an attempt to make it easier for devices to remain in
> runtime PM when the system goes to sleep, mainly to reduce the time
> spent resuming devices.
> 
> For this, we interpret the absence of all PM callback implementations as
> it being safe to do direct_complete, so their ancestors aren't prevented
> from remaining runtime-suspended.
> 
> Additionally, the prepare() callback of USB devices will return 1 if
> runtime PM is enabled and the current wakeup settings are correct.
> 
> With these changes, a uvcvideo device (for example) stays in runtime
> suspend when the system goes to sleep and is left in that state when the
> system resumes, not delaying it unnecessarily.
> 
> Thanks,
> 
> Tomeu
> 
> Changes in v11:
> - Move calls to dev_pm_domain_set() out from &dev->power.lock as that
>   isn't needed for dev->pm_domain.
> 
> Changes in v10:
> - Remove superfluous call to pm_runtime_enabled() as suggested by Alan
> 
> Changes in v9:
> - Add docs noting the need for the device lock to be held before calling
>   device_is_bound()
> - Add docs noting the need for the device lock to be held before calling
>   dev_pm_domain_set()
> - Move to CONFIG_PM_SLEEP as suggested by Rafael and Ulf.
> - Rename from device_check_pm_callbacks to device_pm_check_callbacks to
>   follow with the naming convention of existing API.
> - Re-add calling to device_pm_check_callbacks from device registration
>   and when updating the PM domain of a device.
> 
> Changes in v8:
> - Add device_is_bound()
> - Add dev_pm_domain_set() and update code to use it
> - Move no_pm_callbacks field into CONFIG_PM_SLEEP
> - Call device_check_pm_callbacks only after a device is bound or unbound
> 
> Changes in v7:
> - Reduce indentation by adding a label in device_prepare()
> 
> Changes in v6:
> - Add stub for !CONFIG_PM.
> - Move implementation of device_check_pm_callbacks to power/main.c as it
>   doesn't belong to CONFIG_PM_SLEEP.
> - Take dev->power.lock before modifying flag.
> 
> Changes in v5:
> - Check for all dev_pm_ops instances associated to a device, updating a
>   no_pm_callbacks flag at the times when that could change.
> 
> Tomeu Vizoso (4):
>   device core: add device_is_bound()
>   PM / Domains: add setter for dev.pm_domain
>   PM / sleep: Go direct_complete if driver has no callbacks
>   USB / PM: Allow USB devices to remain runtime-suspended when sleeping
> 
>  arch/arm/mach-omap2/omap_device.c |  7 ++++---
>  drivers/acpi/acpi_lpss.c          |  5 +++--
>  drivers/acpi/device_pm.c          |  5 +++--
>  drivers/base/dd.c                 | 21 +++++++++++++++++++--
>  drivers/base/power/clock_ops.c    |  5 +++--
>  drivers/base/power/common.c       | 24 ++++++++++++++++++++++++
>  drivers/base/power/domain.c       |  8 ++++++--
>  drivers/base/power/main.c         | 35 +++++++++++++++++++++++++++++++++++
>  drivers/base/power/power.h        |  3 +++
>  drivers/gpu/vga/vga_switcheroo.c  | 10 +++++-----
>  drivers/misc/mei/pci-me.c         |  5 +++--
>  drivers/misc/mei/pci-txe.c        |  5 +++--
>  drivers/usb/core/port.c           |  6 ++++++
>  drivers/usb/core/usb.c            |  8 +++++++-
>  include/linux/device.h            |  2 ++
>  include/linux/pm.h                |  1 +
>  include/linux/pm_domain.h         |  3 +++
>  17 files changed, 130 insertions(+), 23 deletions(-)

I've queued up this series for the second half of the v4.4 merge window.

Thanks,
Rafael




More information about the linux-arm-kernel mailing list