[PATCH 1/2] pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio)

[Andrew]

Thomas Petazzoni писал 29.05.2015 12:10:
> Dear Andrew Andrianov,
> 
> On Sat, 11 Apr 2015 23:29:19 +0300, Andrew Andrianov wrote:
>> Signed-off-by: Andrew Andrianov <andrew at ncrmnt.org>
>> ---
>>  drivers/pinctrl/mvebu/pinctrl-armada-370.c |    2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-370.c 
>> b/drivers/pinctrl/mvebu/pinctrl-armada-370.c
>> index c4f51d0..78c332d 100644
>> --- a/drivers/pinctrl/mvebu/pinctrl-armada-370.c
>> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-370.c
>> @@ -364,7 +364,7 @@ static struct mvebu_mpp_mode mv88f6710_mpp_modes[] 
>> = {
>>  	   MPP_FUNCTION(0x5, "audio", "mclk"),
>>  	   MPP_FUNCTION(0x6, "uart0", "cts")),
>>  	MPP_MODE(63,
>> -	   MPP_FUNCTION(0x0, "gpo", NULL),
>> +	   MPP_FUNCTION(0x0, "gpio", NULL),
>>  	   MPP_FUNCTION(0x1, "spi0", "sck"),
>>  	   MPP_FUNCTION(0x2, "tclk", NULL)),
>>  	MPP_MODE(64,
> 
> I know the patch has already been applied, but this is weird: I just
> checked the datasheet again, and it really says this pin is a "gpo".
> I'll try to get some more information.
> 
> Best regards,
> 
> Thomas

Yep, exactly. I've seen that in the public docs. It must be a typo,
unless there's something we don't know.

On DNS-327L this pin is wired as a button. Without th patch only
gpio-buttons driver fails probing, but you can still configure the pin
as input via sysfs gpio interface and even read sensible values from it.
If you have a board where this pin is broken out - it's easy to test.

-- 
Regards,
Andrew