[PATCH v5 08/12] KVM: arm64: re-factor hyp.S debug register code
Alex Bennée
alex.bennee at linaro.org
Fri May 29 02:30:24 PDT 2015
This is a pre-cursor to sharing the code with the guest debug support.
This replaces the big macro that fishes data out of a fixed location
with a more general helper macro to restore a set of debug registers. It
uses macro substitution so it can be re-used for debug control and value
registers. It does however rely on the debug registers being 64 bit
aligned (as they happen to be in the hyp ABI).
Signed-off-by: Alex Bennée <alex.bennee at linaro.org>
---
v3:
- return to the patch series
- add save and restore targets
- change register use and document
v4:
- keep original setup/restore names
- don't use split u32/u64 structure yet
---
arch/arm64/kvm/hyp.S | 519 ++++++++++++++-------------------------------------
1 file changed, 140 insertions(+), 379 deletions(-)
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 74e63d8..9c4897d 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -228,199 +228,52 @@
stp x24, x25, [x3, #160]
.endm
-.macro save_debug
- // x2: base address for cpu context
- // x3: tmp register
-
- mrs x26, id_aa64dfr0_el1
- ubfx x24, x26, #12, #4 // Extract BRPs
- ubfx x25, x26, #20, #4 // Extract WRPs
- mov w26, #15
- sub w24, w26, w24 // How many BPs to skip
- sub w25, w26, w25 // How many WPs to skip
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
-1:
- mrs x20, dbgbcr15_el1
- mrs x19, dbgbcr14_el1
- mrs x18, dbgbcr13_el1
- mrs x17, dbgbcr12_el1
- mrs x16, dbgbcr11_el1
- mrs x15, dbgbcr10_el1
- mrs x14, dbgbcr9_el1
- mrs x13, dbgbcr8_el1
- mrs x12, dbgbcr7_el1
- mrs x11, dbgbcr6_el1
- mrs x10, dbgbcr5_el1
- mrs x9, dbgbcr4_el1
- mrs x8, dbgbcr3_el1
- mrs x7, dbgbcr2_el1
- mrs x6, dbgbcr1_el1
- mrs x5, dbgbcr0_el1
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
-
-1:
- str x20, [x3, #(15 * 8)]
- str x19, [x3, #(14 * 8)]
- str x18, [x3, #(13 * 8)]
- str x17, [x3, #(12 * 8)]
- str x16, [x3, #(11 * 8)]
- str x15, [x3, #(10 * 8)]
- str x14, [x3, #(9 * 8)]
- str x13, [x3, #(8 * 8)]
- str x12, [x3, #(7 * 8)]
- str x11, [x3, #(6 * 8)]
- str x10, [x3, #(5 * 8)]
- str x9, [x3, #(4 * 8)]
- str x8, [x3, #(3 * 8)]
- str x7, [x3, #(2 * 8)]
- str x6, [x3, #(1 * 8)]
- str x5, [x3, #(0 * 8)]
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
-1:
- mrs x20, dbgbvr15_el1
- mrs x19, dbgbvr14_el1
- mrs x18, dbgbvr13_el1
- mrs x17, dbgbvr12_el1
- mrs x16, dbgbvr11_el1
- mrs x15, dbgbvr10_el1
- mrs x14, dbgbvr9_el1
- mrs x13, dbgbvr8_el1
- mrs x12, dbgbvr7_el1
- mrs x11, dbgbvr6_el1
- mrs x10, dbgbvr5_el1
- mrs x9, dbgbvr4_el1
- mrs x8, dbgbvr3_el1
- mrs x7, dbgbvr2_el1
- mrs x6, dbgbvr1_el1
- mrs x5, dbgbvr0_el1
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
-
-1:
- str x20, [x3, #(15 * 8)]
- str x19, [x3, #(14 * 8)]
- str x18, [x3, #(13 * 8)]
- str x17, [x3, #(12 * 8)]
- str x16, [x3, #(11 * 8)]
- str x15, [x3, #(10 * 8)]
- str x14, [x3, #(9 * 8)]
- str x13, [x3, #(8 * 8)]
- str x12, [x3, #(7 * 8)]
- str x11, [x3, #(6 * 8)]
- str x10, [x3, #(5 * 8)]
- str x9, [x3, #(4 * 8)]
- str x8, [x3, #(3 * 8)]
- str x7, [x3, #(2 * 8)]
- str x6, [x3, #(1 * 8)]
- str x5, [x3, #(0 * 8)]
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
+.macro save_debug type
+ // x4: pointer to register set
+ // x5: number of registers to skip
+ // x6..x22 trashed
+
+ adr x22, 1f
+ add x22, x22, x5, lsl #2
+ br x22
1:
- mrs x20, dbgwcr15_el1
- mrs x19, dbgwcr14_el1
- mrs x18, dbgwcr13_el1
- mrs x17, dbgwcr12_el1
- mrs x16, dbgwcr11_el1
- mrs x15, dbgwcr10_el1
- mrs x14, dbgwcr9_el1
- mrs x13, dbgwcr8_el1
- mrs x12, dbgwcr7_el1
- mrs x11, dbgwcr6_el1
- mrs x10, dbgwcr5_el1
- mrs x9, dbgwcr4_el1
- mrs x8, dbgwcr3_el1
- mrs x7, dbgwcr2_el1
- mrs x6, dbgwcr1_el1
- mrs x5, dbgwcr0_el1
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
-
-1:
- str x20, [x3, #(15 * 8)]
- str x19, [x3, #(14 * 8)]
- str x18, [x3, #(13 * 8)]
- str x17, [x3, #(12 * 8)]
- str x16, [x3, #(11 * 8)]
- str x15, [x3, #(10 * 8)]
- str x14, [x3, #(9 * 8)]
- str x13, [x3, #(8 * 8)]
- str x12, [x3, #(7 * 8)]
- str x11, [x3, #(6 * 8)]
- str x10, [x3, #(5 * 8)]
- str x9, [x3, #(4 * 8)]
- str x8, [x3, #(3 * 8)]
- str x7, [x3, #(2 * 8)]
- str x6, [x3, #(1 * 8)]
- str x5, [x3, #(0 * 8)]
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
+ mrs x21, \type\()15_el1
+ mrs x20, \type\()14_el1
+ mrs x19, \type\()13_el1
+ mrs x18, \type\()12_el1
+ mrs x17, \type\()11_el1
+ mrs x16, \type\()10_el1
+ mrs x15, \type\()9_el1
+ mrs x14, \type\()8_el1
+ mrs x13, \type\()7_el1
+ mrs x12, \type\()6_el1
+ mrs x11, \type\()5_el1
+ mrs x10, \type\()4_el1
+ mrs x9, \type\()3_el1
+ mrs x8, \type\()2_el1
+ mrs x7, \type\()1_el1
+ mrs x6, \type\()0_el1
+
+ adr x22, 1f
+ add x22, x22, x5, lsl #2
+ br x22
1:
- mrs x20, dbgwvr15_el1
- mrs x19, dbgwvr14_el1
- mrs x18, dbgwvr13_el1
- mrs x17, dbgwvr12_el1
- mrs x16, dbgwvr11_el1
- mrs x15, dbgwvr10_el1
- mrs x14, dbgwvr9_el1
- mrs x13, dbgwvr8_el1
- mrs x12, dbgwvr7_el1
- mrs x11, dbgwvr6_el1
- mrs x10, dbgwvr5_el1
- mrs x9, dbgwvr4_el1
- mrs x8, dbgwvr3_el1
- mrs x7, dbgwvr2_el1
- mrs x6, dbgwvr1_el1
- mrs x5, dbgwvr0_el1
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
-
-1:
- str x20, [x3, #(15 * 8)]
- str x19, [x3, #(14 * 8)]
- str x18, [x3, #(13 * 8)]
- str x17, [x3, #(12 * 8)]
- str x16, [x3, #(11 * 8)]
- str x15, [x3, #(10 * 8)]
- str x14, [x3, #(9 * 8)]
- str x13, [x3, #(8 * 8)]
- str x12, [x3, #(7 * 8)]
- str x11, [x3, #(6 * 8)]
- str x10, [x3, #(5 * 8)]
- str x9, [x3, #(4 * 8)]
- str x8, [x3, #(3 * 8)]
- str x7, [x3, #(2 * 8)]
- str x6, [x3, #(1 * 8)]
- str x5, [x3, #(0 * 8)]
-
- mrs x21, mdccint_el1
- str x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
+ str x21, [x4, #(15 * 8)]
+ str x20, [x4, #(14 * 8)]
+ str x19, [x4, #(13 * 8)]
+ str x18, [x4, #(12 * 8)]
+ str x17, [x4, #(11 * 8)]
+ str x16, [x4, #(10 * 8)]
+ str x15, [x4, #(9 * 8)]
+ str x14, [x4, #(8 * 8)]
+ str x13, [x4, #(7 * 8)]
+ str x12, [x4, #(6 * 8)]
+ str x11, [x4, #(5 * 8)]
+ str x10, [x4, #(4 * 8)]
+ str x9, [x4, #(3 * 8)]
+ str x8, [x4, #(2 * 8)]
+ str x7, [x4, #(1 * 8)]
+ str x6, [x4, #(0 * 8)]
.endm
.macro restore_sysregs
@@ -465,195 +318,52 @@
msr mdscr_el1, x25
.endm
-.macro restore_debug
- // x2: base address for cpu context
- // x3: tmp register
-
- mrs x26, id_aa64dfr0_el1
- ubfx x24, x26, #12, #4 // Extract BRPs
- ubfx x25, x26, #20, #4 // Extract WRPs
- mov w26, #15
- sub w24, w26, w24 // How many BPs to skip
- sub w25, w26, w25 // How many WPs to skip
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
+.macro restore_debug type
+ // x4: pointer to register set
+ // x5: number of registers to skip
+ // x6..x22 trashed
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
+ adr x22, 1f
+ add x22, x22, x5, lsl #2
+ br x22
1:
- ldr x20, [x3, #(15 * 8)]
- ldr x19, [x3, #(14 * 8)]
- ldr x18, [x3, #(13 * 8)]
- ldr x17, [x3, #(12 * 8)]
- ldr x16, [x3, #(11 * 8)]
- ldr x15, [x3, #(10 * 8)]
- ldr x14, [x3, #(9 * 8)]
- ldr x13, [x3, #(8 * 8)]
- ldr x12, [x3, #(7 * 8)]
- ldr x11, [x3, #(6 * 8)]
- ldr x10, [x3, #(5 * 8)]
- ldr x9, [x3, #(4 * 8)]
- ldr x8, [x3, #(3 * 8)]
- ldr x7, [x3, #(2 * 8)]
- ldr x6, [x3, #(1 * 8)]
- ldr x5, [x3, #(0 * 8)]
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
+ ldr x21, [x4, #(15 * 8)]
+ ldr x20, [x4, #(14 * 8)]
+ ldr x19, [x4, #(13 * 8)]
+ ldr x18, [x4, #(12 * 8)]
+ ldr x17, [x4, #(11 * 8)]
+ ldr x16, [x4, #(10 * 8)]
+ ldr x15, [x4, #(9 * 8)]
+ ldr x14, [x4, #(8 * 8)]
+ ldr x13, [x4, #(7 * 8)]
+ ldr x12, [x4, #(6 * 8)]
+ ldr x11, [x4, #(5 * 8)]
+ ldr x10, [x4, #(4 * 8)]
+ ldr x9, [x4, #(3 * 8)]
+ ldr x8, [x4, #(2 * 8)]
+ ldr x7, [x4, #(1 * 8)]
+ ldr x6, [x4, #(0 * 8)]
+
+ adr x22, 1f
+ add x22, x22, x5, lsl #2
+ br x22
1:
- msr dbgbcr15_el1, x20
- msr dbgbcr14_el1, x19
- msr dbgbcr13_el1, x18
- msr dbgbcr12_el1, x17
- msr dbgbcr11_el1, x16
- msr dbgbcr10_el1, x15
- msr dbgbcr9_el1, x14
- msr dbgbcr8_el1, x13
- msr dbgbcr7_el1, x12
- msr dbgbcr6_el1, x11
- msr dbgbcr5_el1, x10
- msr dbgbcr4_el1, x9
- msr dbgbcr3_el1, x8
- msr dbgbcr2_el1, x7
- msr dbgbcr1_el1, x6
- msr dbgbcr0_el1, x5
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
-1:
- ldr x20, [x3, #(15 * 8)]
- ldr x19, [x3, #(14 * 8)]
- ldr x18, [x3, #(13 * 8)]
- ldr x17, [x3, #(12 * 8)]
- ldr x16, [x3, #(11 * 8)]
- ldr x15, [x3, #(10 * 8)]
- ldr x14, [x3, #(9 * 8)]
- ldr x13, [x3, #(8 * 8)]
- ldr x12, [x3, #(7 * 8)]
- ldr x11, [x3, #(6 * 8)]
- ldr x10, [x3, #(5 * 8)]
- ldr x9, [x3, #(4 * 8)]
- ldr x8, [x3, #(3 * 8)]
- ldr x7, [x3, #(2 * 8)]
- ldr x6, [x3, #(1 * 8)]
- ldr x5, [x3, #(0 * 8)]
-
- adr x26, 1f
- add x26, x26, x24, lsl #2
- br x26
-1:
- msr dbgbvr15_el1, x20
- msr dbgbvr14_el1, x19
- msr dbgbvr13_el1, x18
- msr dbgbvr12_el1, x17
- msr dbgbvr11_el1, x16
- msr dbgbvr10_el1, x15
- msr dbgbvr9_el1, x14
- msr dbgbvr8_el1, x13
- msr dbgbvr7_el1, x12
- msr dbgbvr6_el1, x11
- msr dbgbvr5_el1, x10
- msr dbgbvr4_el1, x9
- msr dbgbvr3_el1, x8
- msr dbgbvr2_el1, x7
- msr dbgbvr1_el1, x6
- msr dbgbvr0_el1, x5
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
-1:
- ldr x20, [x3, #(15 * 8)]
- ldr x19, [x3, #(14 * 8)]
- ldr x18, [x3, #(13 * 8)]
- ldr x17, [x3, #(12 * 8)]
- ldr x16, [x3, #(11 * 8)]
- ldr x15, [x3, #(10 * 8)]
- ldr x14, [x3, #(9 * 8)]
- ldr x13, [x3, #(8 * 8)]
- ldr x12, [x3, #(7 * 8)]
- ldr x11, [x3, #(6 * 8)]
- ldr x10, [x3, #(5 * 8)]
- ldr x9, [x3, #(4 * 8)]
- ldr x8, [x3, #(3 * 8)]
- ldr x7, [x3, #(2 * 8)]
- ldr x6, [x3, #(1 * 8)]
- ldr x5, [x3, #(0 * 8)]
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
-1:
- msr dbgwcr15_el1, x20
- msr dbgwcr14_el1, x19
- msr dbgwcr13_el1, x18
- msr dbgwcr12_el1, x17
- msr dbgwcr11_el1, x16
- msr dbgwcr10_el1, x15
- msr dbgwcr9_el1, x14
- msr dbgwcr8_el1, x13
- msr dbgwcr7_el1, x12
- msr dbgwcr6_el1, x11
- msr dbgwcr5_el1, x10
- msr dbgwcr4_el1, x9
- msr dbgwcr3_el1, x8
- msr dbgwcr2_el1, x7
- msr dbgwcr1_el1, x6
- msr dbgwcr0_el1, x5
-
- add x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
-1:
- ldr x20, [x3, #(15 * 8)]
- ldr x19, [x3, #(14 * 8)]
- ldr x18, [x3, #(13 * 8)]
- ldr x17, [x3, #(12 * 8)]
- ldr x16, [x3, #(11 * 8)]
- ldr x15, [x3, #(10 * 8)]
- ldr x14, [x3, #(9 * 8)]
- ldr x13, [x3, #(8 * 8)]
- ldr x12, [x3, #(7 * 8)]
- ldr x11, [x3, #(6 * 8)]
- ldr x10, [x3, #(5 * 8)]
- ldr x9, [x3, #(4 * 8)]
- ldr x8, [x3, #(3 * 8)]
- ldr x7, [x3, #(2 * 8)]
- ldr x6, [x3, #(1 * 8)]
- ldr x5, [x3, #(0 * 8)]
-
- adr x26, 1f
- add x26, x26, x25, lsl #2
- br x26
-1:
- msr dbgwvr15_el1, x20
- msr dbgwvr14_el1, x19
- msr dbgwvr13_el1, x18
- msr dbgwvr12_el1, x17
- msr dbgwvr11_el1, x16
- msr dbgwvr10_el1, x15
- msr dbgwvr9_el1, x14
- msr dbgwvr8_el1, x13
- msr dbgwvr7_el1, x12
- msr dbgwvr6_el1, x11
- msr dbgwvr5_el1, x10
- msr dbgwvr4_el1, x9
- msr dbgwvr3_el1, x8
- msr dbgwvr2_el1, x7
- msr dbgwvr1_el1, x6
- msr dbgwvr0_el1, x5
-
- ldr x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
- msr mdccint_el1, x21
+ msr \type\()15_el1, x21
+ msr \type\()14_el1, x20
+ msr \type\()13_el1, x19
+ msr \type\()12_el1, x18
+ msr \type\()11_el1, x17
+ msr \type\()10_el1, x16
+ msr \type\()9_el1, x15
+ msr \type\()8_el1, x14
+ msr \type\()7_el1, x13
+ msr \type\()6_el1, x12
+ msr \type\()5_el1, x11
+ msr \type\()4_el1, x10
+ msr \type\()3_el1, x9
+ msr \type\()2_el1, x8
+ msr \type\()1_el1, x7
+ msr \type\()0_el1, x6
.endm
.macro skip_32bit_state tmp, target
@@ -887,12 +597,63 @@ __restore_sysregs:
restore_sysregs
ret
+/* Save debug state */
__save_debug:
- save_debug
+ // x0: base address for vcpu context
+ // x2: ptr to current CPU context
+ // x4/x5: trashed
+
+ mrs x26, id_aa64dfr0_el1
+ ubfx x24, x26, #12, #4 // Extract BRPs
+ ubfx x25, x26, #20, #4 // Extract WRPs
+ mov w26, #15
+ sub w24, w26, w24 // How many BPs to skip
+ sub w25, w26, w25 // How many WPs to skip
+
+ mov x5, x24
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
+ save_debug dbgbcr
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
+ save_debug dbgbvr
+
+ mov x5, x25
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
+ save_debug dbgwcr
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
+ save_debug dbgwvr
+
+ mrs x21, mdccint_el1
+ str x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
ret
+/* Restore debug state */
__restore_debug:
- restore_debug
+ // x0: base address for cpu context
+ // x2: ptr to current CPU context
+ // x4/x5: trashed
+
+ mrs x26, id_aa64dfr0_el1
+ ubfx x24, x26, #12, #4 // Extract BRPs
+ ubfx x25, x26, #20, #4 // Extract WRPs
+ mov w26, #15
+ sub w24, w26, w24 // How many BPs to skip
+ sub w25, w26, w25 // How many WPs to skip
+
+ mov x5, x24
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
+ restore_debug dbgbcr
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
+ restore_debug dbgbvr
+
+ mov x5, x25
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
+ restore_debug dbgwcr
+ add x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
+ restore_debug dbgwvr
+
+ ldr x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
+ msr mdccint_el1, x21
+
ret
__save_fpsimd:
--
2.4.1
More information about the linux-arm-kernel
mailing list