[PATCH v2 0/2] ARM: dts: add Okaya LCD panel for Nitrogen and Sabrelite
Gary Bisson
gary.bisson at boundarydevices.com
Fri May 29 00:56:54 PDT 2015
This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen
and Sabrelite.
It requires a patch from Philipp that adds panel support to the imx parallel
display driver.
https://patchwork.kernel.org/patch/6438311/
Also requires the patch that adds the Okaya display support to the simple
panel driver.
https://patchwork.kernel.org/patch/6503261/
A U-Boot script to configure the displays based on detection of the
touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 ++++++++++++++++++++++++++++++-
2 files changed, 150 insertions(+), 2 deletions(-)
--
2.1.4
More information about the linux-arm-kernel
mailing list