[PATCH v2 09/14] ARM: shmobile: r8a7790 dtsi: Add CPG Clock Domain
Geert Uytterhoeven
geert+renesas at glider.be
Thu May 28 11:53:34 PDT 2015
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG Clock Domain.
Add "power-domains" properties to all device nodes for devices that are
part of the CPG Clock Domain and can be power-managed through an MSTP
clock. This applies to most on-SoC devices, which have a one-to-one
mapping from SoC device to DT device node. Notable exceptions are the
"display" and "sound" nodes, which represent multiple SoC devices, each
having their own MSTP clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>
---
v2:
- Add Reviewed-by,
- Add "power-domains" properties to recently introduced USB-DMAC
device nodes,
- Drop adding "power-domains" properties to the GIC device node, as
adding the INTC_SYS clock is postponed.
---
arch/arm/boot/dts/r8a7790.dtsi | 78 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 72 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51ab8865ea37dc89..468300fde3f0f124 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -134,6 +134,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
};
gpio1: gpio at e6051000 {
@@ -146,6 +147,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
};
gpio2: gpio at e6052000 {
@@ -158,6 +160,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
};
gpio3: gpio at e6053000 {
@@ -170,6 +173,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
};
gpio4: gpio at e6054000 {
@@ -182,6 +186,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
};
gpio5: gpio at e6055000 {
@@ -194,6 +199,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
};
thermal at e61f0000 {
@@ -201,6 +207,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
};
timer {
@@ -218,6 +225,7 @@
<0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0x60>;
@@ -237,6 +245,7 @@
<0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0xff>;
@@ -253,6 +262,7 @@
<0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
};
dmac0: dma-controller at e6700000 {
@@ -281,6 +291,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -311,6 +322,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -339,6 +351,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -367,6 +380,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -378,6 +392,7 @@
0 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -389,6 +404,7 @@
0 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -400,6 +416,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -410,6 +427,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -420,6 +438,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -430,6 +449,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -440,6 +460,7 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
status = "disabled";
@@ -452,6 +473,7 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
status = "disabled";
@@ -464,6 +486,7 @@
reg = <0 0xe6520000 0 0x425>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
dma-names = "tx", "rx";
status = "disabled";
@@ -476,6 +499,7 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
status = "disabled";
@@ -486,6 +510,7 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
reg-io-width = <4>;
@@ -498,6 +523,7 @@
reg = <0 0xee220000 0 0x80>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
dma-names = "tx", "rx";
reg-io-width = <4>;
@@ -515,6 +541,7 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
status = "disabled";
@@ -525,6 +552,7 @@
reg = <0 0xee120000 0 0x328>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx";
status = "disabled";
@@ -535,6 +563,7 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
status = "disabled";
@@ -545,6 +574,7 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
+ power-domains = <&cpg_clocks>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
status = "disabled";
@@ -558,6 +588,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -569,6 +600,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -580,6 +612,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -591,6 +624,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -602,6 +636,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -613,6 +648,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -624,6 +660,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -635,6 +672,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -646,6 +684,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -657,6 +696,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -665,6 +705,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -676,6 +717,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -684,6 +726,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -692,6 +735,7 @@
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ power-domains = <&cpg_clocks>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
@@ -708,6 +752,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
status = "disabled";
usb0: usb-channel at 0 {
@@ -722,33 +767,37 @@
vin0: video at e6ef0000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin1: video at e6ef1000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin2: video at e6ef2000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin3: video at e6ef3000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -757,6 +806,7 @@
reg = <0 0xfe920000 0 0x8000>;
interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+ power-domains = <&cpg_clocks>;
renesas,has-sru;
renesas,#rpf = <5>;
@@ -769,6 +819,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+ power-domains = <&cpg_clocks>;
renesas,has-lut;
renesas,has-sru;
@@ -782,6 +833,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -795,6 +847,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -849,6 +902,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -859,6 +913,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -936,6 +991,7 @@
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1",
"z", "rcan", "adsp";
+ #power-domain-cells = <0>;
};
/* Variable factor clocks */
@@ -1321,6 +1377,7 @@
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1334,6 +1391,7 @@
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1346,6 +1404,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1358,6 +1417,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1370,6 +1430,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1380,6 +1441,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ power-domains = <&cpg_clocks>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1388,10 +1450,11 @@
pci0: pci at ee090000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <0 0>;
@@ -1422,10 +1485,11 @@
pci1: pci at ee0b0000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0 0xee0b0000 0 0xc00>,
<0 0xee0a0000 0 0x1100>;
interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <1 1>;
@@ -1443,6 +1507,7 @@
compatible = "renesas,pci-r8a7790";
device_type = "pci";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1495,6 +1560,7 @@
interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
--
1.9.1
More information about the linux-arm-kernel
mailing list