[PATCH] drm: atmel_hlcdc: Add support for get_timings

[Philipp Zabel]

Am Donnerstag, den 28.05.2015, 14:45 +0200 schrieb Boris Brezillon:
> Hi Philip,
> 
> On Thu, 28 May 2015 13:13:28 +0200
> Philipp Zabel <p.zabel at pengutronix.de> wrote:
> 
> > Hi Boris,
> > 
> > Am Dienstag, den 26.05.2015, 11:28 +0200 schrieb Boris Brezillon:
> > > Hi David,
> > > 
> > > On Thu, 21 May 2015 11:06:56 +0200
> > > David Dueck <davidcdueck at googlemail.com> wrote:
> > > 
> > > > drm_panel supports querying timing ranges. If the supplied mode does
> > > > not work with the hlcdc we query the panel and try to find a suitable
> > > > mode.
> > > 
> > > This patch looks good to me.
> > > 
> > > Philip, Thierry, could you confirm this is the correct way of dealing
> > > with timing ranges.
> > 
> > I wonder about two things:
> > 
> > This implementation minimizes the sum of absolute differences between
> > chosen and typical values. I wonder if it would be better to try and
> > minimize the difference between the chosen and nominal vertical refresh
> > rate.
> 
> I'm not sure to understand what you mean.
> Are you suggesting that we should try keeping the vtotal (and maybe the
> htotal too) value unchanged by adapting the timing values ?

More or less, only that I'd first modify htotal and vtotal to get closer
to the ideal frametime (1/vrefresh) if the pixel clock can't be set
exactly to the panel's typical pixel clock rate.

> Something like that:
> 
> 	vfront_porch = atmel_hlcdc_choose_parameter(1, 0x40,
> 						    timings->vfront_porch);
> 	
> 	adjusted_mode->vsync_start = adjusted_mode->vdisplay + vfront_porch;
> 
> 	vsync_len = atmel_hlcdc_choose_parameter(1, 0x40,
> 						 adjusted_mode->vsync_end -
> 						 adjusted_mode->vsync_start);
> 	adjusted_mode->vsync_end = adjusted_mode->vsync_start + vsync_len;
> 	vback_porch = atmel_hlcdc_choose_parameter(0, 0x40,
> 						   timings->vtotal -
> 						   adjusted_mode->vsync_end);
> 	adjusted_mode->vtotal = adjusted_mode->vsync_end + vback_porch;
> 	/* ... */
> 
> If that's the case, then I definitely agree.
> 
> > 
> > Is this something that should be done earlier, in create_panel_output,
> > so that the connector's modes already contain the corrected settings?
> 
> You mean creating our own drm_display modes (and taking the timing
> constraints when creating those modes) instead of calling drm_panel's
> ->get_modes().

Yes.

regards
Philipp