[PATCH] ARM: dts: odroidxu3: Enable USB3 regulators

[Krzysztof Kozlowski]

On 28.05.2015 17:58, Anand Moon wrote:
> Enable regulator for usbdrd3_0 and usbdrd3_1
>>From the schematic pin diagram USB3_0 and USB3_1
> is regulated by LDO9 and LD011.

Please reformat statement above to proper sentence(s) without ">" before
"From".

> 
> Fix the boot message of failed.
> [    3.503539] exynos-dwc3 usb at 12000000: Looking up vdd33-supply from device tree
> [    3.503556] exynos-dwc3 usb at 12000000: Looking up vdd33-supply property in node /usb at 12000000 failed
> [    3.503568] usb at 12000000 supply vdd33 not found, using dummy regulator
> [    3.509154] exynos-dwc3 usb at 12000000: Looking up vdd10-supply from device tree
> [    3.509170] exynos-dwc3 usb at 12000000: Looking up vdd10-supply property in node /usb at 12000000 failed
> [    3.509181] usb at 12000000 supply vdd10 not found, using dummy regulator
> [    3.917548] exynos-dwc3 usb at 12400000: Looking up vdd33-supply from device tree
> [    3.917565] exynos-dwc3 usb at 12400000: Looking up vdd33-supply property in node /usb at 12400000 failed
> [    3.917578] usb at 12400000 supply vdd33 not found, using dummy regulator
> [    3.922731] exynos-dwc3 usb at 12400000: Looking up vdd10-supply from device tree
> [    3.922747] exynos-dwc3 usb at 12400000: Looking up vdd10-supply property in node /usb at 12400000 failed
> 
> ---
> This patch is based on Krzysztof github branch work-next/odroid-xu3-s2mps11-irq
> ---

I mentioned this already on previous postings. Let's make an exercise.
Please:
1. Save your email as mbox format (from mailer).
2. Go to a GIT repo with kernel and checkout base branch.
3. git am 0001-the-name-of-file.mbox
4. git show

Do you see the signed-off-by in commit?

The patch itself looks good, thanks for fixing this. Just please fix the
issues with commit message.

By the way:
1. The always-on from LDO9 could be probably removed if the ehci-exynos
driver had regulator consumer implemented.
2. The Documentation/devicetree/bindings/usb/exynos-usb.txt (or dwc.txt)
should proably mention the vdd-supply property.

Best regards,
Krzysztof