[PATCH v4 2/2] soc: Add driver for Freescale Vybrid Platform
Stefan Agner
stefan at agner.ch
Wed May 27 14:42:18 PDT 2015
On 2015-05-26 13:36, Sanchayan Maity wrote:
> This adds a SoC driver to be used by the Freescale Vybrid SoC's.
> We create the "fsl" directory for holding the different Freescale
> designs. Driver utilises syscon to get the various register values
> needed. After this sysfs exposes some SoC specific properties as
> below:
>
>> cd /sys/devices/soc0
>> ls
> family machine power revision soc_id subsystem uevent
>> cat family
> Freescale Vybrid VF610
>> cat machine
> Freescale Vybrid
>> cat revision
> 00000013
>> cat soc_id
> df6472a60c1c39d4
>
> Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/fsl/Kconfig | 9 +++
> drivers/soc/fsl/Makefile | 1 +
> drivers/soc/fsl/soc-vf610.c | 168 ++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 180 insertions(+)
> create mode 100644 drivers/soc/fsl/Kconfig
> create mode 100644 drivers/soc/fsl/Makefile
> create mode 100644 drivers/soc/fsl/soc-vf610.c
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index d8bde82..8b4dd2b 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -1,5 +1,6 @@
> menu "SOC (System On Chip) specific Drivers"
>
> +source "drivers/soc/fsl/Kconfig"
> source "drivers/soc/mediatek/Kconfig"
> source "drivers/soc/qcom/Kconfig"
> source "drivers/soc/ti/Kconfig"
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 70042b2..142676e 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -2,6 +2,7 @@
> # Makefile for the Linux Kernel SOC specific device drivers.
> #
>
> +obj-$(CONFIG_SOC_VF610) += fsl/
> obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
> obj-$(CONFIG_ARCH_QCOM) += qcom/
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
> new file mode 100644
> index 0000000..d0ac671
> --- /dev/null
> +++ b/drivers/soc/fsl/Kconfig
> @@ -0,0 +1,9 @@
> +#
> +# Freescale SoC drivers
> +
> +config SOC_VF610
> + bool "SoC bus device for the Freescale Vybrid platform"
> + select SOC_BUS
> + help
> + Include support for the SoC bus on the Freescale Vybrid platform
> + providing some sysfs information about the module variant.
> \ No newline at end of file
> diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
> new file mode 100644
> index 0000000..5fccbba
> --- /dev/null
> +++ b/drivers/soc/fsl/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_SOC_VF610) += soc-vf610.o
> diff --git a/drivers/soc/fsl/soc-vf610.c b/drivers/soc/fsl/soc-vf610.c
> new file mode 100644
> index 0000000..6425cfb
> --- /dev/null
> +++ b/drivers/soc/fsl/soc-vf610.c
> @@ -0,0 +1,168 @@
> +/*
> + * Copyright 2015 Toradex AG
> + *
> + * Author: Sanchayan Maity <sanchayan.maity at toradex.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/random.h>
> +#include <linux/slab.h>
> +#include <linux/sys_soc.h>
> +
> +#define DRIVER_NAME "vf610-soc-bus"
> +
> +#define MSCM_CPxCOUNT_OFFSET 0x0000002C
> +#define MSCM_CPxCFG1_OFFSET 0x00000014
> +
> +static struct soc_device_attribute *soc_dev_attr;
> +static struct soc_device *soc_dev;
> +
> +static int vf610_soc_probe(struct platform_device *pdev)
> +{
> + struct regmap *ocotp_regmap, *mscm_regmap, *rom_regmap;
> + struct device *dev = &pdev->dev;
> + struct device_node *node = pdev->dev.of_node;
> + struct device_node *soc_node;
> + struct of_phandle_args pargs;
> + char soc_type[] = "xx0";
> + u32 cfg0_offset, cfg1_offset, rom_rev_offset;
> + u32 soc_id1, soc_id2, rom_rev;
> + u32 cpxcount, cpxcfg1;
> + u64 soc_id;
> + int ret;
> +
> + mscm_regmap = syscon_node_to_regmap(node);
> + if (IS_ERR(mscm_regmap)) {
> + dev_err(dev, "regmap lookup for mscm failed\n");
> + return PTR_ERR(mscm_regmap);
> + }
> +
> + soc_node = of_find_node_by_path("/soc");
> +
> + ret = of_parse_phandle_with_fixed_args(soc_node,
> + "ocotp-cfg", 2, 0, &pargs);
> + if (ret) {
> + dev_err(dev, "lookup failed for ocotp-cfg node %d\n", ret);
> + return ret;
> + }
> +
> + ocotp_regmap = syscon_node_to_regmap(pargs.np);
> + if (IS_ERR(ocotp_regmap)) {
> + of_node_put(pargs.np);
> + dev_err(dev, "regmap lookup for ocotp failed\n");
> + return PTR_ERR(ocotp_regmap);
> + }
> +
> + cfg0_offset = pargs.args[0];
> + cfg1_offset = pargs.args[1];
> + of_node_put(pargs.np);
> +
> + ret = of_parse_phandle_with_fixed_args(soc_node,
> + "rom-revision", 1, 0, &pargs);
> + if (ret) {
> + dev_err(dev, "lookup failed for rom-revision node %d\n", ret);
> + return ret;
> + }
> +
> + rom_regmap = syscon_node_to_regmap(pargs.np);
> + if (IS_ERR(rom_regmap)) {
> + of_node_put(pargs.np);
> + dev_err(dev, "regmap lookup for ocrom failed\n");
> + return PTR_ERR(rom_regmap);
> + }
> +
> + rom_rev_offset = pargs.args[0];
> + of_node_put(pargs.np);
> +
> + ret = regmap_read(ocotp_regmap, cfg0_offset, &soc_id1);
> + if (ret)
> + return -ENODEV;
> +
> + ret = regmap_read(ocotp_regmap, cfg1_offset, &soc_id2);
> + if (ret)
> + return -ENODEV;
> +
> + soc_id = (u64) soc_id1 << 32 | soc_id2;
> + add_device_randomness(&soc_id, sizeof(soc_id));
> +
> + ret = regmap_read(mscm_regmap, MSCM_CPxCOUNT_OFFSET, &cpxcount);
> + if (ret)
> + return -ENODEV;
> +
> + ret = regmap_read(mscm_regmap, MSCM_CPxCFG1_OFFSET, &cpxcfg1);
> + if (ret)
> + return -ENODEV;
> +
> + soc_type[0] = cpxcount ? '6' : '5'; /* Dual Core => VF6x0 */
> + soc_type[1] = cpxcfg1 ? '1' : '0'; /* L2 Cache => VFx10 */
> +
> + ret = regmap_read(rom_regmap, rom_rev_offset, &rom_rev);
> + if (ret)
> + return -ENODEV;
> +
> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> + if (!soc_dev_attr)
> + return -ENOMEM;
> +
> + soc_dev_attr->machine = kasprintf(GFP_KERNEL, "Freescale Vybrid");
> + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%016llx", soc_id);
> + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Freescale Vybrid VF%s",
> + soc_type);
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%08x", rom_rev);
> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + kfree(soc_dev_attr->revision);
> + kfree(soc_dev_attr->family);
> + kfree(soc_dev_attr->soc_id);
> + kfree(soc_dev_attr->machine);
> + kfree(soc_dev_attr);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +static int vf610_soc_remove(struct platform_device *pdev)
> +{
> + if (soc_dev_attr) {
> + kfree(soc_dev_attr->revision);
> + kfree(soc_dev_attr->family);
> + kfree(soc_dev_attr->soc_id);
> + kfree(soc_dev_attr->machine);
> + kfree(soc_dev_attr);
> + }
> +
> + if (soc_dev)
> + soc_device_unregister(soc_dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id vf610_soc_bus_match[] = {
> + { .compatible = "fsl,vf610-mscm-cpucfg", },
IMHO that is a mix and match now. We still bind this driver to a
specific device, while we point directly to the registers from the SoC
level (in the device tree).
I'm not sure if the suggestion I made in v2 is acceptable: Couldn't we
add compatible nodes to the SoC level and bind this driver to the SoC
directly? I think if we point to the registers at SoC level, we should
also bind this driver to the SoC level. Of course, then we additionally
need to point to the mscm-cpucfg register to get the SoC type
information.
If we keep this driver bound to "fsl,vf610-mscm-cpucfg", then I think we
should also point from this node to the other nodes/registers...
Arnd, where did you meant to put the pointers?
--
Stefan
More information about the linux-arm-kernel
mailing list