[PATCH 3/5] ARM: l2c: clean up l2c_configure()
Russell King
rmk+kernel at arm.linux.org.uk
Wed May 27 10:40:47 PDT 2015
l2c_configure() does not follow the pattern of other l2c_* functions.
Fix this so that it does to avoid future confusion.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mm/cache-l2x0.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 977eb9f4f77e..2864a7bcc24b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -110,15 +110,7 @@ static inline void l2c_unlock(void __iomem *base, unsigned num)
static void l2c_configure(void __iomem *base)
{
- if (outer_cache.configure) {
- outer_cache.configure(&l2x0_saved_regs);
- return;
- }
-
l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL);
-
- if (l2x0_data->configure)
- l2x0_data->configure(base);
}
/*
@@ -130,7 +122,11 @@ static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock)
unsigned long flags;
l2x0_saved_regs.aux_ctrl = aux;
- l2c_configure(base);
+
+ if (outer_cache.configure)
+ outer_cache.configure(&l2x0_saved_regs);
+ else
+ l2x0_data->configure(base);
l2c_unlock(base, num_lock);
@@ -252,6 +248,7 @@ static const struct l2c_init_data l2c210_data __initconst = {
.num_lock = 1,
.enable = l2c_enable,
.save = l2c_save,
+ .configure = l2c_configure,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
@@ -409,6 +406,7 @@ static const struct l2c_init_data l2c220_data = {
.num_lock = 1,
.enable = l2c220_enable,
.save = l2c_save,
+ .configure = l2c_configure,
.outer_cache = {
.inv_range = l2c220_inv_range,
.clean_range = l2c220_clean_range,
@@ -569,6 +567,8 @@ static void l2c310_configure(void __iomem *base)
{
unsigned revision;
+ l2c_configure(base);
+
/* restore pl310 setup */
l2c_write_sec(l2x0_saved_regs.tag_latency, base,
L310_TAG_LATENCY_CTRL);
@@ -1066,6 +1066,7 @@ static const struct l2c_init_data of_l2c210_data __initconst = {
.of_parse = l2x0_of_parse,
.enable = l2c_enable,
.save = l2c_save,
+ .configure = l2c_configure,
.outer_cache = {
.inv_range = l2c210_inv_range,
.clean_range = l2c210_clean_range,
@@ -1084,6 +1085,7 @@ static const struct l2c_init_data of_l2c220_data __initconst = {
.of_parse = l2x0_of_parse,
.enable = l2c220_enable,
.save = l2c_save,
+ .configure = l2c_configure,
.outer_cache = {
.inv_range = l2c220_inv_range,
.clean_range = l2c220_clean_range,
@@ -1416,6 +1418,7 @@ static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
.enable = l2c_enable,
.fixup = aurora_fixup,
.save = aurora_save,
+ .configure = l2c_configure,
.outer_cache = {
.inv_range = aurora_inv_range,
.clean_range = aurora_clean_range,
@@ -1435,6 +1438,7 @@ static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
.enable = aurora_enable_no_outer,
.fixup = aurora_fixup,
.save = aurora_save,
+ .configure = l2c_configure,
.outer_cache = {
.resume = l2c_resume,
},
@@ -1608,6 +1612,7 @@ static void __init tauros3_save(void __iomem *base)
static void tauros3_configure(void __iomem *base)
{
+ l2c_configure(base);
writel_relaxed(l2x0_saved_regs.aux2_ctrl,
base + TAUROS3_AUX2_CTRL);
writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
--
2.1.0
More information about the linux-arm-kernel
mailing list