[PATCHv3 10/10] CLK: TI: always enable DESHDCP clock

Tomi Valkeinen tomi.valkeinen at ti.com
Wed May 27 02:11:52 PDT 2015

On 20/05/15 14:47, Tero Kristo wrote:
> On 05/06/2015 01:08 PM, Tomi Valkeinen wrote:
>> DESHDCP clock is needed on DRA7 based SoCs to enable the DSS IP. That
>> clock is an odd one, as it is not supposed to be any kind of core clock
>> for DSS, and we don't even support HDCP, but the clock is still needed
>> even for the HWMOD framework to be able to reset the DSS IP.
>> As there's no support for multiple core clocks in the HWMOD framework,
>> we don't have any obvious place to enable this clock when DSS IP is
>> being enabled.
>> Furthermore, the HDMI on OMAP5 DSS is the same as on DRA7, and OMAP5
>> does not have any such clock configuration bit. This suggests that on
>> OMAP5 the DESHDCP clock is always enabled, and for DRA7 we have the
>> possibility to gate it.
>> So, as we don't have any clean way to enable and disable the clock
>> based on the need, this patch enables the clock at boot time, making it
>> work similarly to OMAP5.
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
>> ---
>>   drivers/clk/ti/clk-7xx.c | 7 ++++++-
>>   1 file changed, 6 insertions(+), 1 deletion(-)
>> diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
>> index 2dd956b9affa..63b8323df918 100644
>> --- a/drivers/clk/ti/clk-7xx.c
>> +++ b/drivers/clk/ti/clk-7xx.c
>> @@ -312,7 +312,7 @@ static struct ti_dt_clk dra7xx_clks[] = {
>>   int __init dra7xx_dt_clk_init(void)
>>   {
>>       int rc;
>> -    struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck;
>> +    struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck;
>>       ti_dt_clocks_register(dra7xx_clks);
>> @@ -348,5 +348,10 @@ int __init dra7xx_dt_clk_init(void)
>>       if (rc)
>>           pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
>> +    hdcp_ck = clk_get_sys(NULL, "dss_deshdcp_clk");
>> +    rc = clk_prepare_enable(hdcp_ck);
>> +    if (rc)
>> +        pr_err("%s: failed to set dss_deshdcp_clk\n", __func__);
>> +
>>       return rc;
>>   }
> You should rather use the assigned-clock properties in DT to accomplish
> this, the manual clock tweaks under the drivers/clk/ti/clk-* files
> should be converted to DT setup also.

So what should we do?

I got a confirmation from a HW guy that this clock is always enabled on
OMAP5, and that's why we haven't seen these issues there. I believe
there's a HW bug related to this, as having the HDCP clock disabled
should not prevent the use of DSS, but it does.

In my opinion the bit should just be always set, which is what this
patch does. Although I think even adding a clock node is kind of extra,
as it's clear the bit cannot be properly used.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150527/c7d167a7/attachment.sig>

More information about the linux-arm-kernel mailing list