[PATCH v3 2/3] ahci: Store irq number in struct ahci_host_priv
Robert Richter
rric at kernel.org
Wed May 27 01:01:32 PDT 2015
From: Robert Richter <rrichter at cavium.com>
The irq number for msix devices is taken from msi_list instead of
pci_dev. Thus, the irq number of a device needs to be stored in struct
ahci_host_priv now. Host controller can be activated then in a
generic way.
Signed-off-by: Robert Richter <rrichter at cavium.com>
---
drivers/ata/acard-ahci.c | 4 +++-
drivers/ata/ahci.c | 15 ++++++++++-----
drivers/ata/ahci.h | 4 ++--
drivers/ata/libahci.c | 25 ++++++++++---------------
drivers/ata/libahci_platform.c | 4 +++-
drivers/ata/sata_highbank.c | 3 ++-
6 files changed, 30 insertions(+), 25 deletions(-)
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index c962886d7e71..c67fce2a4cbf 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -433,6 +433,8 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
+
+ hpriv->irq = pdev->irq;
hpriv->flags |= (unsigned long)pi.private_data;
if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
@@ -498,7 +500,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
acard_ahci_pci_print_info(host);
pci_set_master(pdev);
- return ahci_host_activate(host, pdev->irq, &acard_ahci_sht);
+ return ahci_host_activate(host, &acard_ahci_sht);
}
module_pci_driver(acard_ahci_pci_driver);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c8aedd836dc9..8cdc9ebbbc43 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1237,20 +1237,25 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
if (nvec > 1)
hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
- return nvec;
+ goto out;
single_msi:
+ nvec = 1;
+
rc = pci_enable_msi(pdev);
if (rc < 0)
return rc;
+out:
+ hpriv->irq = pdev->irq;
- return 1;
+ return nvec;
}
static int ahci_init_intx(struct pci_dev *pdev, unsigned int n_ports,
struct ahci_host_priv *hpriv)
{
pci_intx(pdev, 1);
+ hpriv->irq = pdev->irq;
return 0;
}
@@ -1428,13 +1433,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
- ahci_init_interrupts(pdev, n_ports, hpriv);
-
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
host->private_data = hpriv;
+ ahci_init_interrupts(pdev, n_ports, hpriv);
+
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
@@ -1480,7 +1485,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
- return ahci_host_activate(host, pdev->irq, &ahci_sht);
+ return ahci_host_activate(host, &ahci_sht);
}
module_pci_driver(ahci_pci_driver);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 71262e08648e..f219507b1fbc 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -341,6 +341,7 @@ struct ahci_host_priv {
struct phy **phys;
unsigned nports; /* Number of ports */
void *plat_data; /* Other platform data */
+ unsigned int irq; /* interrupt line */
/*
* Optional ahci_start_engine override, if not set this gets set to the
* default ahci_start_engine during ahci_save_initial_config, this can
@@ -393,8 +394,7 @@ void ahci_set_em_messages(struct ahci_host_priv *hpriv,
struct ata_port_info *pi);
int ahci_reset_em(struct ata_host *host);
void ahci_print_info(struct ata_host *host, const char *scc_s);
-int ahci_host_activate(struct ata_host *host, int irq,
- struct scsi_host_template *sht);
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht);
void ahci_error_handler(struct ata_port *ap);
static inline void __iomem *__ahci_port_base(struct ata_host *host,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 61a9c07e0dff..022da7ce77fb 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2298,7 +2298,7 @@ static int ahci_port_start(struct ata_port *ap)
/*
* Switch to per-port locking in case each port has its own MSI vector.
*/
- if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
+ if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
spin_lock_init(&pp->lock);
ap->lock = &pp->lock;
}
@@ -2426,7 +2426,10 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
rc = ata_host_start(host);
if (rc)
return rc;
-
+ /*
+ * Requests IRQs according to AHCI-1.1 when multiple MSIs were
+ * allocated. That is one MSI per port, starting from @irq.
+ */
for (i = 0; i < host->n_ports; i++) {
struct ahci_port_priv *pp = host->ports[i]->private_data;
@@ -2465,31 +2468,23 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
/**
* ahci_host_activate - start AHCI host, request IRQs and register it
* @host: target ATA host
- * @irq: base IRQ number to request
* @sht: scsi_host_template to use when registering the host
*
- * Similar to ata_host_activate, but requests IRQs according to AHCI-1.1
- * when multiple MSIs were allocated. That is one MSI per port, starting
- * from @irq.
- *
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ahci_host_activate(struct ata_host *host, int irq,
- struct scsi_host_template *sht)
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
{
struct ahci_host_priv *hpriv = host->private_data;
- int rc;
if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
- rc = ahci_host_activate_multi_irqs(host, irq, sht);
- else
- rc = ata_host_activate(host, irq, ahci_single_irq_intr,
- IRQF_SHARED, sht);
- return rc;
+ return ahci_host_activate_multi_irqs(host, hpriv->irq, sht);
+
+ return ata_host_activate(host, hpriv->irq, ahci_single_irq_intr,
+ IRQF_SHARED, sht);
}
EXPORT_SYMBOL_GPL(ahci_host_activate);
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index d89305d289f6..aaa761b9081c 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -518,6 +518,8 @@ int ahci_platform_init_host(struct platform_device *pdev,
return -EINVAL;
}
+ hpriv->irq = irq;
+
/* prepare host */
pi.private_data = (void *)(unsigned long)hpriv->flags;
@@ -588,7 +590,7 @@ int ahci_platform_init_host(struct platform_device *pdev,
ahci_init_controller(host);
ahci_print_info(host, "platform");
- return ahci_host_activate(host, irq, sht);
+ return ahci_host_activate(host, sht);
}
EXPORT_SYMBOL_GPL(ahci_platform_init_host);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 24e311fe2c1c..8638d575b2b9 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -499,6 +499,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ hpriv->irq = irq;
hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
@@ -568,7 +569,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
ahci_init_controller(host);
ahci_print_info(host, "platform");
- rc = ahci_host_activate(host, irq, &ahci_highbank_platform_sht);
+ rc = ahci_host_activate(host, &ahci_highbank_platform_sht);
if (rc)
goto err0;
--
2.1.1
More information about the linux-arm-kernel
mailing list