[PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

[Gary Bisson]

Philipp, Shawn, All,

On Wed, May 27, 2015 at 5:06 AM, Shawn Guo <shawn.guo at linaro.org> wrote:
> On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote:
>> This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with
>> a 18-bit parallel interface for both Nitrogen and Sabrelite.
>>
>> A U-Boot script to configure the displays based on detection of the
>> touch controller is available for reference here:
>> https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
>>
>> Gary Bisson (2):
>>   ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
>>   ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
>
> Philipp,
>
> Are you okay with these two patches?

I've actually just ran into Philipp's patch on drm_panel support for
parallel-display driver.
https://patchwork.kernel.org/patch/6438311/

If the above patch is merged soon, maybe mine should be reworked to
use the panel as well (and add the Okaya timings to the simple panel
driver).

Let me know what would be the best.

Regards,
Gary