[PATCH 1/2] ASoC: atmel: simplify Kconfig

Nicolas Ferre nicolas.ferre at atmel.com
Tue May 26 03:13:43 PDT 2015


Le 26/05/2015 00:04, Alexandre Belloni a écrit :
> Enclose the options in if SND_ATMEL_SOC ... endif to remove the dependency.
> Also remove the useless description for SND_ATMEL_SOC_SSC.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>

For the record:
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> ---
>  sound/soc/atmel/Kconfig | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
> index e7d08806f3e9..93abe4e6d596 100644
> --- a/sound/soc/atmel/Kconfig
> +++ b/sound/soc/atmel/Kconfig
> @@ -6,27 +6,22 @@ config SND_ATMEL_SOC
>  	  the ATMEL SSC interface. You will also need
>  	  to select the audio interfaces to support below.
>  
> +if SND_ATMEL_SOC
> +
>  config SND_ATMEL_SOC_PDC
>  	tristate
> -	depends on SND_ATMEL_SOC
>  
>  config SND_ATMEL_SOC_DMA
>  	tristate
> -	depends on SND_ATMEL_SOC
>  	select SND_SOC_GENERIC_DMAENGINE_PCM
>  
>  config SND_ATMEL_SOC_SSC
>  	tristate
> -	depends on SND_ATMEL_SOC
> -	help
> -	  Say Y or M if you want to add support for codecs the
> -	  ATMEL SSC interface. You will also needs to select the individual
> -	  machine drivers to support below.
>  
>  config SND_AT91_SOC_SAM9G20_WM8731
>  	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
>  	depends on ARCH_AT91 || COMPILE_TEST
> -	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
> +	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
>  	select SND_ATMEL_SOC_PDC
>  	select SND_ATMEL_SOC_SSC
>  	select SND_SOC_WM8731
> @@ -37,7 +32,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
>  config SND_ATMEL_SOC_WM8904
>  	tristate "Atmel ASoC driver for boards using WM8904 codec"
>  	depends on ARCH_AT91 || COMPILE_TEST
> -	depends on ATMEL_SSC && SND_ATMEL_SOC && I2C
> +	depends on ATMEL_SSC && I2C
>  	select SND_ATMEL_SOC_SSC
>  	select SND_ATMEL_SOC_DMA
>  	select SND_SOC_WM8904
> @@ -48,10 +43,11 @@ config SND_ATMEL_SOC_WM8904
>  config SND_AT91_SOC_SAM9X5_WM8731
>  	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
>  	depends on ARCH_AT91 || COMPILE_TEST
> -	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
> +	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
>  	select SND_ATMEL_SOC_SSC
>  	select SND_ATMEL_SOC_DMA
>  	select SND_SOC_WM8731
>  	help
>  	  Say Y if you want to add support for audio SoC on an
>  	  at91sam9x5 based board that is using WM8731 codec.
> +endif
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list