[PATCH v4 1/2] media: atmel-isi: add runtime pm support
Josh Wu
josh.wu at atmel.com
Tue May 26 02:14:40 PDT 2015
Hi, Laurent
On 5/26/2015 4:16 PM, Laurent Pinchart wrote:
> Hi Josh,
>
> Thank you for the patch.
>
> On Tuesday 26 May 2015 16:00:09 Josh Wu wrote:
>> The runtime pm resume/suspend will enable/disable pclk (ISI peripheral
>> clock).
>> And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need
>> access ISI registers. In atmel_isi_probe(), remove the isi disable code
>> as in the moment ISI peripheral clock is not enable yet.
>>
>> In the meantime, as clock_start()/clock_stop() is used to control the
>> mclk not ISI peripheral clock. So move this to start[stop]_streaming()
>> function.
>>
>> Signed-off-by: Josh Wu <josh.wu at atmel.com>
>> ---
>>
>> Changes in v4:
>> - need to call pm_runtime_disable() in atmel_isi_remove().
>> - merged the patch which remove isi disable code in atmel_isi_probe() as
>> isi peripherial clock is not enabled in this moment.
>> - refine the commit log
>>
>> Changes in v3: None
>> Changes in v2:
>> - merged v1 two patch into one.
>> - use runtime_pm_put() instead of runtime_pm_put_sync()
>> - enable peripheral clock before access ISI registers.
>>
>> drivers/media/platform/soc_camera/atmel-isi.c | 54 ++++++++++++++++++++----
>> 1 file changed, 46 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
>> b/drivers/media/platform/soc_camera/atmel-isi.c index 2879026..194e875
>> 100644
>> --- a/drivers/media/platform/soc_camera/atmel-isi.c
>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
>> @@ -20,6 +20,7 @@
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/slab.h>
>>
>> #include <media/atmel-isi.h>
>> @@ -386,6 +387,8 @@ static int start_streaming(struct vb2_queue *vq,
>> unsigned int count) struct atmel_isi *isi = ici->priv;
>> int ret;
>>
>> + pm_runtime_get_sync(ici->v4l2_dev.dev);
>> +
>> /* Reset ISI */
>> ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
>> if (ret < 0) {
> You need to call pm_runtime_put() in the error path, otherwise an
> atmel_isi_wait_status() failure will keep the device enabled.
Nice catch. Thanks.
>
>> @@ -445,6 +448,8 @@ static void stop_streaming(struct vb2_queue *vq)
>> ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
>> if (ret < 0)
>> dev_err(icd->parent, "Disable ISI timed out\n");
>> +
>> + pm_runtime_put(ici->v4l2_dev.dev);
>> }
>>
>> static struct vb2_ops isi_video_qops = {
>> @@ -516,7 +521,13 @@ static int isi_camera_set_fmt(struct soc_camera_device
>> *icd, if (mf->code != xlate->code)
>> return -EINVAL;
>>
>> + /* Enable PM and peripheral clock before operate isi registers */
>> + pm_runtime_get_sync(ici->v4l2_dev.dev);
>> +
>> ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
>> +
>> + pm_runtime_put(ici->v4l2_dev.dev);
> I think it would simplify the code to move the configure_geometry() call to
> start_streaming() as you already call pm_runtime_get_sync() there. That can be
> done in a separate patch though.
I think it's a good idea. I would like to make this in a separate patch
and not include in this series.
In summary, I'll resend this patch just with the fix you mentioned in
above (fix the error path in start_streaming).
Is that okay for you?
Best Regards,
Josh Wu
>
>> +
>> if (ret < 0)
>> return ret;
>>
>> @@ -736,14 +747,9 @@ static int isi_camera_clock_start(struct
>> soc_camera_host *ici) struct atmel_isi *isi = ici->priv;
>> int ret;
>>
>> - ret = clk_prepare_enable(isi->pclk);
>> - if (ret)
>> - return ret;
>> -
>> if (!IS_ERR(isi->mck)) {
>> ret = clk_prepare_enable(isi->mck);
>> if (ret) {
>> - clk_disable_unprepare(isi->pclk);
>> return ret;
>> }
>> }
>> @@ -758,7 +764,6 @@ static void isi_camera_clock_stop(struct soc_camera_host
>> *ici)
>>
>> if (!IS_ERR(isi->mck))
>> clk_disable_unprepare(isi->mck);
>> - clk_disable_unprepare(isi->pclk);
>> }
>>
>> static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
>> @@ -855,9 +860,14 @@ static int isi_camera_set_bus_param(struct
>> soc_camera_device *icd)
>>
>> cfg1 |= ISI_CFG1_THMASK_BEATS_16;
>>
>> + /* Enable PM and peripheral clock before operate isi registers */
>> + pm_runtime_get_sync(ici->v4l2_dev.dev);
>> +
>> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
>> isi_writel(isi, ISI_CFG1, cfg1);
>>
>> + pm_runtime_put(ici->v4l2_dev.dev);
>> +
>> return 0;
>> }
>>
>> @@ -889,6 +899,7 @@ static int atmel_isi_remove(struct platform_device
>> *pdev) sizeof(struct fbd) * MAX_BUFFER_NUM,
>> isi->p_fb_descriptors,
>> isi->fb_descriptors_phys);
>> + pm_runtime_disable(&pdev->dev);
>>
>> return 0;
>> }
>> @@ -1027,8 +1038,6 @@ static int atmel_isi_probe(struct platform_device
>> *pdev) if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10)
>> isi->width_flags |= 1 << 9;
>>
>> - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
>> -
>> irq = platform_get_irq(pdev, 0);
>> if (IS_ERR_VALUE(irq)) {
>> ret = irq;
>> @@ -1049,6 +1058,9 @@ static int atmel_isi_probe(struct platform_device
>> *pdev) soc_host->v4l2_dev.dev = &pdev->dev;
>> soc_host->nr = pdev->id;
>>
>> + pm_suspend_ignore_children(&pdev->dev, true);
>> + pm_runtime_enable(&pdev->dev);
>> +
>> if (isi->pdata.asd_sizes) {
>> soc_host->asd = isi->pdata.asd;
>> soc_host->asd_sizes = isi->pdata.asd_sizes;
>> @@ -1062,6 +1074,7 @@ static int atmel_isi_probe(struct platform_device
>> *pdev) return 0;
>>
>> err_register_soc_camera_host:
>> + pm_runtime_disable(&pdev->dev);
>> err_req_irq:
>> err_ioremap:
>> vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
>> @@ -1074,6 +1087,30 @@ err_alloc_ctx:
>> return ret;
>> }
>>
>> +static int atmel_isi_runtime_suspend(struct device *dev)
>> +{
>> + struct soc_camera_host *soc_host = to_soc_camera_host(dev);
>> + struct atmel_isi *isi = container_of(soc_host,
>> + struct atmel_isi, soc_host);
>> +
>> + clk_disable_unprepare(isi->pclk);
>> +
>> + return 0;
>> +}
>> +static int atmel_isi_runtime_resume(struct device *dev)
>> +{
>> + struct soc_camera_host *soc_host = to_soc_camera_host(dev);
>> + struct atmel_isi *isi = container_of(soc_host,
>> + struct atmel_isi, soc_host);
>> +
>> + return clk_prepare_enable(isi->pclk);
>> +}
>> +
>> +static const struct dev_pm_ops atmel_isi_dev_pm_ops = {
>> + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend,
>> + atmel_isi_runtime_resume, NULL)
>> +};
>> +
>> static const struct of_device_id atmel_isi_of_match[] = {
>> { .compatible = "atmel,at91sam9g45-isi" },
>> { }
>> @@ -1085,6 +1122,7 @@ static struct platform_driver atmel_isi_driver = {
>> .driver = {
>> .name = "atmel_isi",
>> .of_match_table = of_match_ptr(atmel_isi_of_match),
>> + .pm = &atmel_isi_dev_pm_ops,
>> },
>> };
More information about the linux-arm-kernel
mailing list