[BUG] Read-Only THP causes stalls (commit 10359213d)

[Christoffer Dall]

On Mon, May 25, 2015 at 01:05:15PM +0300, Kirill A. Shutemov wrote:
> On Sun, May 24, 2015 at 09:34:04PM +0200, Christoffer Dall wrote:
> > Hi all,
> > 
> > I noticed a regression on my arm64 APM X-Gene system a couple
> > of weeks back.  I would occassionally see the system lock up and see RCU
> > stalls during the caching phase of kernbench.  I then wrote a small
> > script that does nothing but cache the files
> > (http://paste.ubuntu.com/11324767/) and ran that in a loop.  On a known
> > bad commit (v4.1-rc2), out of 25 boots, I never saw it get past 21
> > iterations of the loop.  I have since tried to run a bisect from v3.19 to
> > v4.0 using 100 iterations as my criteria for a good commit.
> > 
> > This resulted in the following first bad commit:
> > 
> > 10359213d05acf804558bda7cc9b8422a828d1cd
> > (mm: incorporate read-only pages into transparent huge pages, 2015-02-11)
> > 
> > Indeed, running the workload on v4.1-rc4 still produced the behavior,
> > but reverting the above commit gets me through 100 iterations of the
> > loop.
> > 
> > I have not tried to reproduce on an x86 system.  Turning on a bunch
> > of kernel debugging features *seems* to hide the problem.  My config for
> > the XGene system is defconfig + CONFIG_BRIDGE and
> > CONFIG_POWER_RESET_XGENE.
> > 
> > Please let me know if I can help test patches or other things I can
> > do to help.  I'm afraid that by simply reading the patch I didn't see
> > anything obviously wrong with it which would cause this behavior.
> 
> I don't see the problem on x86.

I'm wondering if we could have some weird combination of how the
specific architecture works along with these patches...

> 
> Some backtraces could help to track it down.
> 
I don't really get backtraces as the sytem just locks up.  But here are
some of the RCU stalls as I've observed them on the console:

http://paste.ubuntu.com/11014701/
http://paste.ubuntu.com/11023143/
http://paste.ubuntu.com/11023261/


Occasionally, I also get this error from the SATA system at the moment
when I power off the device, but not sure if it is related:

  ata1: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0xe frozen
  ata1: irq_stat 0x00400000, PHY RDY changed
  ata1: SError: { 10B8B Dispar }

Thanks,
-Christoffer